Lehrstuhl für Tissue Engineering und Regenerative Medizin
Refine
Has Fulltext
- yes (23)
Is part of the Bibliography
- yes (23)
Year of publication
Document Type
- Doctoral Thesis (23)
Keywords
- Tissue Engineering (11)
- In-vitro-Kultur (4)
- Dünndarm (2)
- In vitro (2)
- Melanom (2)
- Stammzelle (2)
- intestinal in vitro model (2)
- pancreas (2)
- 3D Modell (1)
- 3D model (1)
Institute
- Graduate School of Life Sciences (23) (remove)
Sonstige beteiligte Institutionen
Einleitung: Strukturelle Defekte der gastrointestinalen Hohlorgane stellen ein allgegen-wärtiges Problem im klinischen Alltag dar. Sie entstehen meist auf dem Boden einer ent-zündlichen oder tumorösen Grunderkrankung und können außerdem traumatisch sowie durch medizinische Eingriffe hervorgerufen werden. In der Folge kommt es zur Kontami-nation des umliegenden Gewebes mit Magen- bzw. Darminhalt, wodurch deletäre Folgen wie eine systemische Infektion, also eine Sepsis mit Multiorganversagen drohen können. Vor diesem Hintergrund sind gastrointestinale Defekte immer als potenziell lebensbedroh-lich für den Patienten zu betrachten. Die adäquate und kausale Behandlung erfolgt je nach Ätiologie und Zustand des Patienten durch eine Operation oder eine endoskopische Inter-vention. Hierzu stehen zahlreiche etablierte, operative und interventionelle Therapieme-thoden zur Verfügung. In manchen Fällen stoßen die etablierten Techniken jedoch an ihre Grenzen. Bei Patienten mit schwerwiegenden Komorbiditäten oder im Rahmen neuer me-dizinischer Verfahren sind Innovationen gefragt. Die Grundidee der vorliegenden Arbeit ist die Entwicklung einer biotechnologischen Therapieoption zur Versorgung gastrointesti-naler Hohlorganperforationen.
Methoden: Zur Durchführung einer Machbarkeitsstudie wurden zehn Göttinger Mi-nischweine in zwei Gruppen mit jeweils 5 Tieren aufgeteilt. Den Tieren der Experimental-gruppe wurden Hautbiopsien entnommen und daraus Fibroblasten isoliert, welche vo-rübergehend konserviert wurden. Unter Verwendung von azellularisiertem Schweinedarm erfolgte die Herstellung von Implantaten nach den Prinzipien des Tissue Engineerings. Die Tiere beider Gruppen wurden einer Minilaparotomie und einer ca. 3cm-Inzision der Ma-genvorderwand unterzogen. Die anschließende Versorgung wurde in der Experimental-gruppe durch Implantation der neuartigen Konstrukte erzielt. In der Kontrollgruppe wur-de im Sinne des Goldstandards eine konventionelle Naht durchgeführt. Anschließend wurden die Tiere für vier Wochen beobachtet. Eine bzw. zwei Wochen nach dem pri-mären Eingriff wurde bei allen Tieren beider Gruppen eine Laparoskopie bzw. Gastrosko-pie durchgeführt. Am Ende der klinischen Observationsphase wurden die Versuchstiere getötet und die entsprechenden Magenareale zur histologischen Untersuchung explantiert.
Ergebnisse: Die Herstellung der Implantate konnte auf der Basis standardisierter zellbio-logischer Methoden problemlos etabliert werden. Alle Tiere beider Gruppen überlebten den Primäreingriff sowie das vierwöchige Nachbeobachtungsintervall und zeigten dabei keine klinischen Zeichen möglicher Komplikationen. Die durchgeführten Laparoskopien und Gastroskopien ergaben bei keinem der Tiere Hinweise auf Leckagen oder lokale Infek-tionsprozesse. Die histologische Aufarbeitung zeigte im Bereich des ursprünglichen De-fekts eine bindegewebige Überbrückung sowie ein beginnendes Remodeling der Magen-schleimhaut in beiden Gruppen.
Schlussfolgerungen: Durch die Verknüpfung von Einzelprozessen der Zellkultur und dem Großtier-OP konnte ein neues Verfahren zum Verschluss gastrointestinaler Defekt erfolgreich demonstriert und etabliert werden. Das Projekt konnte reibungslos durchge-führt werden und lieferte Ergebnisse, die dem Goldstandard nicht unterlegen waren. Auf-grund der kleinen Fallzahl und weiterer methodischer Limitationen sind jedoch nur einge-schränkt Schlussfolgerungen möglich, weshalb die Durchführung größerer und gut geplan-ter Studien notwendig ist. Die Erkenntnisse dieser Pilotstudie liefern eine solide Basis für die Planung weiterführender Untersuchungen.
The main function of the small intestine is the absorption of essential nutrients, water and vitamins. Moreover, it constitutes a barrier protecting us from toxic xenobiotics and pathogens. For a better understanding of these processes, the development of intestinal in vitro models is of great interest to the study of pharmacological and pathological issues such as transport mechanisms and barrier function. Depending on the scientific questions, models of different complexity can be applied.
In vitro Transwell® systems based on a porous PET-membrane enable the standardized study of transport mechanisms across the intestinal barrier as well as the investigation of the influence of target substances on barrier integrity. However, this artificial setup reflects only limited aspects of the physiology of the native small intestine and can pose an additional physical barrier. Hence, the applications of this model for tissue engineering are limited.
Previously, tissue models based on a biological decellularized scaffold derived from porcine gut tissue were demonstrated to be a good alternative to the commonly used Transwell® system. This study showed that preserved biological extracellular matrix components like collagen and elastin provide a natural environment for the epithelial cells, promoting cell adhesion and growth. Intestinal epithelial cells such as Caco-2 cultured on such a scaffold showed a confluent, tight monolayer on the apical surface. Additionally, myofibroblasts were able to migrate into the scaffold supporting intestinal barrier formation.
In this thesis, dendritic cells were additionally introduced to this model mimicking an important component of the immune system. This co-culture model was then successfully proven to be suitable for the screening of particle formulations developed as delivery system for cancer antigens in peroral vaccination studies. In particular, nanoparticles based on PLGA, PEG-PAGE-PLGA, Mannose-PEG-PAGE-PLGA and Chitosan were tested. Uptake studies revealed only slight differences in the transcellular transport rate among the different particles. Dendritic cells were shown to phagocytose the particles after they have passed the intestinal barrier. The particles demonstrated to be an effective carrier system to transport peptides across the intestinal barrier and therefore present a useful tool for the development of novel drugs.
Furthermore, to mimic the complex structure and physiology of the gut including the presence of multiple different cell types, the Caco-2 cell line was replaced by primary intestinal cells to set up a de novo tissue model. To that end, intestinal crypts including undifferentiated stem cells and progenitor cells were isolated from human small intestinal tissue samples (jejunum) and expanded in vitro in organoid cultures. Cells were cultured on the decellularized porcine gut matrix in co-culture with intestinal myofibroblasts. These novel tissue models were maintained under either static or dynamic conditions.
Primary intestinal epithelial cells formed a confluent monolayer including the major differentiated cell types positive for mucin (goblet cells), villin (enterocytes), chromogranin A (enteroendocrine cells) and lysozyme (paneth cells). Electron microscopy images depicted essential functional units of an intact epithelium, such as microvilli and tight junctions. FITC-dextran permeability and TEER measurements were used to assess tightness of the cell layer. Models showed characteristic transport activity for several reference substances. Mechanical stimulation of the cells by a dynamic culture system had a great impact on barrier integrity and transporter activity resulting in a tighter barrier and a higher efflux transporter activity.
In Summary, the use of primary human intestinal cells combined with a biological decellularized scaffold offers a new and promising way to setup more physiological intestinal in vitro models. Maintenance of primary intestinal stem cells with their proliferation and differentiation potential together with adjusted culture protocols might help further improve the models. In particular, dynamic culture systems and co culture models proofed to be a first crucial steps towards a more physiological model. Such tissue models might be useful to improve the predictive power of in vitro models and in vitro in vivo correlation (IVIVC) studies. Moreover, these tissue models will be useful tools in preclinical studies to test pharmaceutical substances, probiotic active organisms, human pathogenic germs and could even be used to build up patient-specific tissue model for personalized medicine.
Electrochemical impedance spectroscopy (EIS) is a valuable technique analyzing electrochemical behavior of biological systems such as electrical characterization of cells and biomolecules, drug screening, and biomaterials in biomedical field. In EIS, an alternating current (AC) power signal is applied to the biological system, and the impedance of the system is measured over a range of frequencies.
In vitro culture models of endothelial or epithelial barrier tissue can be achieved by culturing barrier tissue on scaffolds made with synthetic or biological materials that provide separate compartments (apical and basal sides), allowing for further studies on drug transport. EIS is a great candidate for non-invasive and real-time monitoring of the electrical properties that correlate with barrier integrity during the tissue modeling. Although commercially available transendothelial/transepithelial electrical resistance (TEER) measurement devices are widely used, their use is particularly common in static transwell culture. EIS is considered more suitable than TEER measurement devices in bioreactor cultures that involve dynamic fluid flow to obtain accurate and reliable measurements. Furthermore, while TEER measurement devices can only assess resistance at a single frequency, EIS measurements can capture both resistance and capacitance properties of cells, providing additional information about the cellular barrier's characteristics across various frequencies. Incorporating EIS into a bioreactor system requires the careful optimization of electrode integration within the bioreactor setup and measurement parameters to ensure accurate EIS measurements. Since bioreactors vary in size and design depending on the purpose of the study, most studies have reported using an electrode system specifically designed for a particular bioreactor. The aim of this work was to produce multi-applicable electrodes and established methods for automated non-invasive and real-time monitoring using the EIS technique in bioreactor cultures. Key to the electrode material, titanium nitride (TiN) coating was fabricated on different substrates (materials and shape) using physical vapor deposition (PVD) and housed in a polydimethylsiloxane (PDMS) structure to allow the electrodes to function as independent units. Various electrode designs were evaluated for double-layer capacitance and morphology using EIS and scanning electron microscopy (SEM), respectively. The TiN-coated tube electrode was identified as the optimal choice. Furthermore, EIS measurements were performed to examine the impact of influential parameters related to culture conditions on the TiN-coated electrode system. In order to demonstrate the versatility of the electrodes, these electrodes were then integrated into in different types of perfusion bioreactors for monitoring barrier cells. Blood-brain barrier (BBB) cells were cultured in the newly developed dynamic flow bioreactor, while human umblical vascular endothelial cells (HUVECs) and Caco-2 cells were cultured in the miniature hollow fiber bioreactor (HFBR). As a result, the TiN-coated tube electrode system enabled investigation of BBB barrier integrity in long-term bioreactor culture. While EIS measurement could not detect HUVECs electrical properties in miniature HFBR culture, there was the possibility of measuring the barrier integrity of Caco-2 cells, indicating potential usefulness for evaluating their barrier function. Following the bioreactor cultures, the application of the TiN-coated tube electrode was expanded to hemofiltration, based on the hypothesis that the EIS system may be used to monitor clotting or clogging phenomena in hemofiltration. The findings suggest that the EIS monitoring system can track changes in ion concentration of blood before and after hemofiltration in real-time, which may serve as an indicator of clogging of filter membranes. Overall, our research demonstrates the potential of TiN-coated tube electrodes for sensitive and versatile non-invasive monitoring in bioreactor cultures and medical devices.
The limited intrinsic self-healing capability of articular cartilage requires treatment of
cartilage defects. Material assisted and cell based therapies are in clinical practice but
tend to result in formation of mechanical inferior fibro-cartilage in long term follow up. If
a lesion has not been properly restored degenerative diseases are diagnosed as late sequela
causing pain and loss in morbidity. Complex three dimensional tissue models mimicking
physiological situation allow investigation of cartilage metabolism and mechanisms involved
in repair. A standardized and reproducible model cultured under controllable conditions
ex vivo to maintain tissue properties is of relevance for comparable studies.
Topic of this thesis was the establishment of an cartilage defect model that allows for
testing novel biomaterials and investigate the effect of defined defect depths on formation
of repair tissue.
In part I an ex vivo osteochondral defect model was established based on isolation of
porcine osteochondral explants (OCE) from medial condyles, 8 mm in diameter and 5 mm
in height. Full thickness cartilage defects with 1 mm to 4 mm in diameter were created
to define ex vivo cartilage critical size after 28 days culture with custom developed static
culture device. In part II of this thesis hydrogel materials, namely collagen I isolated from
rat tail, commercially available fibrin glue, matrix-metalloproteinase clevable poly(ethylene
glycol) polymerized with heparin (starPEGh), methacrylated poly(N-(2-hydroxypropyl)
methacrylamide mono-dilactate-poly(ethylene glycol) triblock copolymer/methacrylated
hyaluronic acid (MP/HA), thiol functionalized HA/allyl functionalized poly(glycidol)
(P(AGE/G)-HA-SH), were tested cell free and chondrocyte loaded (20 mio/ml) as implant
in 4 mm cartilage defects to investigate cartilage regeneration. Reproducible chondral
defects, 8 mm in diameter and 1 mm in height, were generated with an artificial tissue
cutter (ARTcut®) to investigate effect of defect depth on defect regeneration in part III.
In all approaches OCE were analyzed by Safranin-O staining to visualize proteoglycans
in cartilage and/or hydrogels. Immuno-histological and -fluorescent stainings (aggrecan,
collagen II, VI and X, proCollagen I, SOX9, RUNX2), gene expression analysis (aggrecan,
collagen II and X, SOX9, RUNX2) of chondrocyte loaded hydrogels (part II) and proteoglycan
and DNA content (Part I & II) were performed for detailed analysis of cartilage
regeneration.
Part I: The development of custom made static culture device, consisting of inserts in which OCE is fixed and deep well plate, allowed tissue specific media supply without
supplementation of TGF . Critical size diameter was defined to be 4 mm.
Part II: Biomaterials revealed differences in cartilage regeneration. Collagen I and fibrin
glue showed presence of cells migrated from OCE into cell free hydrogels with indication
of fibrous tissue formation by presence of proCollagen I. In chondrocyte loaded study
cartilage matrix proteins aggrecan, collagen II and VI and transcription factor SOX9 were
detected after ex vivo culture throughout the two natural hydrogels collagen I and fibrin
glue whereas markers were localized in pericellular matrix in starPEGh. Weak stainings resulted
for MP/HA and P(AGE/G)-HA-SH in some cell clusters. Gene expression data and
proteoglycan quantification supported histological findings with tendency of hypertrophy
indicated by upregulation of collagen X and RunX2 in MP/HA and P(AGE/G)-HA-SH.
Part III: In life-dead stainings recruitment of cells from OCE into empty or cell free
collagen I treated chondral defects was seen.
Separated and tissue specific media supply is critical to maintain ECM composition in
cartilage. Presence of OCE stimulates cartilage matrix synthesis in chondrocyte loaded
collagen I hydrogel and reduces hypertrophy compared to free swelling conditions and
pellet cultures. Differences in cartilage repair tissue formation resulted in preference of
natural derived polymers compared to synthetic based materials. The ex vivo cartilage
defect model represents a platform for testing novel hydrogels as cartilage materials, but
also to investigate the effect of cell seeding densities, cell gradients, cell co-cultures on
defect regeneration dependent on defect depth. The separated media compartments allow
for systematic analysis of pharmaceutics, media components or inflammatory cytokines on
bone and cartilage metabolism and matrix stability.
Critical size bone defects and nonunion fractures remain difficult to treat. Although cell‐loaded bone substitutes have improved bone ingrowth and formation, the lack of methods for achieving viability and the uniform distribution of cells in the scaffold limits their use as bone grafts. In addition, the predominant mechanical stimulus that drives early osteogenic cell maturation has not been clearly identified. Further, it is challenging to evaluate mechanical stimuli (i.e., deformation and fluid–flow-induced shear stress) because they are interdependent. This thesis compares different mechanical stimuli applied to cell-seeded scaffolds to develop bone grafts efficiently for the treatment of critical size bone defects. It also seeks to understand how deformation strain and interstitial fluid–flow-induced shear stress promote osteogenic lineage commitment. In this thesis, different scaffolds were seeded with primary human bone marrow mesenchymal stem cells (BM-MSCs) from different donors and subjected to static and dynamic culture conditions. In contrast with the static culture conditions, homogenous cell distributions were accomplished under dynamic culture conditions. Additionally, the induction of osteogenic lineage commitment without the addition of soluble factors was observed in the bioreactor system after one week of cell culture. To determine the role of mechanical stimuli, a bioreactor was developed to apply mechanical deformation force to a mesenchymal stem sell (MSC) line (telomerase reverse transcriptase (TERT)) expressing a strain-responsive AP-1 luciferase reporter construct on porous scaffolds. Increased luciferase expression was observed in the deformation strain compared with the shear stress strain. Furthermore, the expression of osteogenic lineage commitment markers such as osteonectin, osteocalcin (OC), osteopontin, runt-related transcription factor 2 (RUNX2), alkaline phosphate (AP), and collagen type 1 was significantly downregulated in the shear stress strain compared with the deformation strain. These findings establish that the deformation strain was the predominant stimulus causing skeletal precursors to undergo osteogenesis in earlier stages of osteogenic cell maturation. Finally, these findings were used to develop a bioreactor in vitro test system in which the effect of medication on osteoporosis could be tested. Primary human BM-MSCs from osteoporotic donors were subjected to strontium ranelate (an osteoporotic drug marketed as Protelos®). Increased expression of collagen type 1 and calcification was seen in the drugtreated osteoporotic stem cells compared with the nondrug-treated osteoporotic stem cells. Thus, this bioreactor technology can easily be adapted into an in vitro osteoporotic drug testing system.
Das maligne Melanom nimmt als Tumorerkrankung mit hoher Metastasierungsrate und steigenden Inzidenzraten bei höchster Mortalität aller Hauttumoren eine zunehmende Bedeutung in der modernen Onkologie ein. Frühzeitige Diagnosemöglichkeiten und moderne Behandlungen konnten das Überleben der Patienten bereits erheblich verbessern. Jedoch besteht nach wie vor Bedarf an geeigneten Modellen, um die Melanomprogression vollständig zu verstehen und neue wirksame Therapien zu entwickeln. Hierfür werden häufig Tiermodelle verwendet, diese spiegeln jedoch nicht die menschliche Mikroumgebung wider. Zweidimensionalen Zellkulturen fehlen dagegen entscheidende Elemente der Tumormikroumgebung. Daher wurde in dieser Arbeit ein dreidimensionales epidermales Tumormodell des malignen Melanoms, welches aus primären humanen Keratinozyten und verschiedenen Melanomzelllinien besteht, entwickelt. Die eingesetzten Melanomzelllinien variieren in ihren Treibermutationen, wodurch das Modell in der Lage ist, Wirkstoffe zu untersuchen, die spezifisch auf diese Mutationen wirken. Mit Techniken des Tissue Engineerings konnte ein dreidimensionales Hautmodell aufgebaut werden, das alle charakteristischen Schichten der Epidermis aufweist und im Bereich des stratum basale Melanomcluster ausbildet. Diese reichen je nach Größe und Ausdehnung bis in suprabasale Epidermisschichten hinein. Die Tumor-Histopathologie, der Tumorstoffwechsel sowie tumorassoziierte Proteinsekretionen ließen sich im in vitro Modell nachweisen. Darüber hinaus konnte ein Protokoll entwickelt werden, mit dem einzelne Zellen aus den Modellen reisoliert werden können. Dies ermöglichte es, den Proliferationszustand innerhalb des jeweiligen Modells zu charakterisieren und die Wirkung von Antitumortherapien gezielt zu bewerten. Die Anwendbarkeit als Testsystem im Bereich der Tumortherapeutika wurde mit dem in der Klinik häufig verwendeten v-raf-Maus-Sarkom-Virus-Onkogen-Homolog B (BRAF)-Inhibitor Vemurafenib demonstriert. Der selektive BRAF-Inhibitor reduzierte erfolgreich das Tumorwachstum in den Modellen mit BRAF-mutierten Melanomzellen, was durch eine Verringerung der metabolischen Aktivität, der proliferierenden Zellen und des Glukoseverbrauchs gezeigt wurde. Für die Implementierung des Modells in die präklinische Therapieentwicklung wurde B-B-Dimethylacrylshikonin, ein vielversprechender Wirkstoffkandidat, welcher einen Zellzyklusarrest mit anschließender Apoptose bewirkt, im Modell getestet.
Bei einer Anwendung der Modelle im Bereich der Testung topischer Behandlungen ist eine Barrierefunktion der Modelle notwendig, die der in vivo Situation nahe kommt. Die Barriereeigenschaften der Hautäquivalente wurden durch die Melanomzellen nachweislich nicht beeinflusst, sind aber im Vergleich zur in vivo Situation noch unzureichend. Eine signifikante Steigerung der Hautbarriere konnte durch die Bereitstellung von Lipiden und die Anregung hauteigener Regenerationsprozesse erreicht werden. Über den Nachweis des transepidermalen Wasserverlusts konnte eine Messmethode zur nicht-invasiven Bestimmung der Hautbarriere etabliert und über den Vergleich zur Impedanzspektroskopie validiert werden. Hierbei gelang es, erstmals die Korrelation der Hautmodelle zur in vivo Situation über ein solches Verfahren zu zeigen. Das entwickelte epidermale Modell konnte durch die Integration eines dermalen Anteils und einer Endothelzellschicht noch weiter an die komplexe Struktur und Physiologie der Haut angepasst werden um Untersuchungen, die mit der Metastierung und Invasion zusammenhängen, zu ermöglichen. Die artifizielle Dermis basiert auf einem Kollagen-Hydrogel mit primären Fibroblasten. Eine dezellularisierte Schweinedarmmatrix ließ sich zur Erweiterung des Modells um eine Endothelzellschicht nutzen. Dabei wanderten die primären Fibroblasten apikal in die natürliche Schweindarmmatrix ein, während die Endothelzellen basolateral eine geschlossene Schicht bildeten.
Die in dieser Arbeit entwickelten Gewebemodelle sind in der Lage, die Vorhersagekraft der in vitro Modelle und die in vitro - in vivo Korrelation zu verbessern. Durch die Kombination des Melanommodells mit einer darauf abgestimmten Analytik wurde ein neuartiges Werkzeug für die präklinische Forschung zur Testung von pharmazeutischen Wirkstoffen geschaffen.
Respiratory infections are a significant health concern worldwide, and the airway epithelium plays a crucial role in regulating airway function and modulating inflammatory processes. However, most studies on respiratory infections have used cell lines or animal models, which may not accurately reflect native physiological conditions, especially regarding human pathogens. We generated human nasal mucosa (hNM) and tracheobronchial mucosa (hTM) models to address this issue using primary human airway epithelial cells and fibroblasts. We characterised these human airway tissue models (hAM) using high speed video microscopy, single cell RNA sequencing, immunofluorescence staining,
and ultrastructural analyses that revealed their complexity and cellular heterogeneity. We demonstrated that Bordetella pertussis virulence factor adenylate cyclase toxin (CyaA) elevated the intracellular production of cyclic adenosine monophosphate (cAMP) and secretion of interleukin (IL) 6, IL 8, and human beta defensin 2 (HBD2). In addition, we compared the responses of the tissue models from two different anatomical sites (the upper and lower respiratory mucosa) and are the first to report such differential susceptibility towards CyaA using 3D primary airway cell derivedmodels. The effect of toxin treatment on the epithelial barrier integrity of the tissue models was assessed by measuring the flux of fluorescein isothiocyanate (FITC)-conjugated dextran across the models. Though we observed a cell type specific response with respect to intracellular cAMP production and IL 6, IL 8, and HBD2 secretion in the models treated with CyaA on the apical side, the epithelial membrane barrier integrity was not compromised. In addition to toxin studies, using these characterised models, we established viral infection studies for Influenza A (IAV), Respiratory Syncytial Virus subtype B (RSV), and severe acute respiratory syndrome coronavirus 2. We visualised the morphological consequences of the viral infection using ultrastructural analysis
and immunofluorescence. We verified the effective infection in hAM by measuring the viral RNA using RTqPCR and detected elevated cytokine levels in response to infection using biochemical assays. In contrast to cell lines, studies on viral infection using hAM demonstrated that infected areas were localized to specific regions. This led to the formation of infection hotspots, which were more likely to occur when models derived from different donors were infected separately with all three viruses. IAV infected tissue models replicate the clinical findings of H1N1 infection, such as mucus
hypersecretion, cytokine release, and infection-associated epithelial cell damage.Finally, we paved the steps towards understanding the impact of IAV infection on disease models. We generated hTM from biopsies obtained from chronic obstructive pulmonary disease (COPD) patients. As a model to study the impact of COPD on respiratory infections, considering the increase in COPD cases in the past decade and the continued predicted increase in the future. We established the IAV infection
protocol to capture the early infection signatures in non-COPD and COPD conditions using scRNA-seq. We investigated the infection kinetics of IAV (H1N1-clinical isolate) in hTM and found that viruses were actively released approximately 24 hours post infection. The scRNA-seq data from the hTM derived from non-COPD and COPD patients, revealed lower levels of SCGB1A1 (club cell marker) gene expression in the COPD-control group compared to the non-COPD control group, consistent with previous clinical studies. Furthermore, we observed that IAV infection elevated SCGB1A1 gene expression especially in secretory cells of both the COPD and non COPD groups. This may imply the role of club cells as early responders during IAV infection providing epithelial repair, regeneration, and resistance to spread of infection. This is the first study to address the molecular diversity in COPD and non-COPD disease models infected with IAV investigating the early response (6 h) of specific cell types in the human lower airways towards infection using scRNA-seq. These findings
highlight the potential interplay between COPD, IAV infection, and altered vulnerability to other viral infections and respiratory illnesses making the hAM applicable for addressing more specific research questions and validating potential targets, such as SCGB1A1 targeted therapy for chronic lung diseases. Our findings demonstrate the potential of the hNM and hTM for investigating respiratory infections, innate immune responses, and trained immunity in non-immune cells. Our experiments show that hAM may represent a more accurate representation of the native physiological condition and improve our understanding of the disease mechanisms. Furthermore, these models promote non-animal research as they replicate clinical findings. We can further increase their complexity by incorporating dynamic flow systems and immune cells catered to the research question.
Mit jährlich circa 11 Millionen Fällen weltweit, stellen schwere Brandwunden bis heute einen großen Anteil an Verletzungen dar, die in Kliniken behandelt werden müssen. Während leichte Verbrennungen meist problemlos heilen, bedarf die Behandlung tieferer Verbrennungen medizinischer Intervention. Zellbasierte Therapeutika zeigen hier bereits große Erfolge, aufgrund der eingeschränkten Übertragbarkeit von Ergebnissen aus Tiermodellen ist jedoch sowohl die Testung neuer Produkte, als auch die Erforschung der Wundheilung bei Brandwunden noch immer schwierig.
Aufgrund dessen wurden in dieser Arbeit zwei Ziele verfolgt: Die Etablierung von Methoden, um ein zellbasiertes Therapeutikum produzieren zu können und die Entwicklung eines Modells zur Untersuchung von Verbrennungswunden. Zunächst wurden hierfür die Kulturbedingungen und -protokolle zur Isolation und Expansion von Keratinozyten so angepasst, dass sie gängigen Regularien zur Produktion medizinischer Produkte entsprechen. Hier zeigten die Zellen auch in anschließenden Analysen, dass charakteristische Merkmale nicht verloren hatten. Darüber hinaus gelang es, die Zellen mithilfe verschiedener protektiver Substanzen erfolgreich einzufrieren und zu konservieren.
Des Weiteren konnte ein Modell etabliert werden, das eine Verbrennung ersten Grades widerspiegelt. Über einen Zeitraum von zwei Wochen wurde seine Regeneration hinsichtlich verschiedener Aspekte, wie der Histomorphologie, dem Metabolismus und der Reepithelialisierungsrate, untersucht. Die Modelle zeigten hier viele Parallelen zur Wundheilung in vivo auf. Um die Eignung der Modelle zur Testung von Wirkstoffen zu ermitteln wurde außerdem eine Behandlung mit 5% Dexpanthenol getestet. Sie resultierte in einer verbesserten Histomorphologie und einer erhöhten Anzahl an proliferativen Zellen in den Modellen, beschleunigte jedoch die Reepithelialisierung nicht. Zusammengefasst konnten in dieser Arbeit zunächst Methoden etabliert werden, um ein medizinisches Produkt aus Keratinozyten herzustellen und zu charakterisieren. Außerdem wurde ein Modell entwickelt, anhand dessen die Wundheilung und Behandlung von Verbrennungen ersten Grades untersucht werden kann und welches als Basis zur Entwicklung von Modellen von tieferen Verbrennungen dienen kann.
Die Risikobewertung von Chemikalien ist für die öffentliche Gesundheit von entschei-dender Bedeutung, weshalb strenge Testverfahren zu deren toxikologischer Begutach-tung angewandt werden. Die ursprünglich tierbasierten Testverfahren werden aufgrund von neuen wissenschaftlichen Erkenntnissen und wegen ökonomischer Ineffizienz sowie ethischer Fragwürdigkeit immer mehr durch alternative Methoden ohne Tiermodelle ersetzt. Für den toxikologischen Endpunkt der Augenreizung wurden bereits die ersten alternativen Testsysteme auf der Basis von ex vivo- oder in vitro-Modellen entwickelt. Jedoch ist bis dato kein alternatives Testsystem in der Lage, das gesamte Spektrum der verschiedenen Kategorien der Augenreizungen nach dem global harmonisierten System zur Einstufung und Kennzeichnung von Chemikalien (GHS) vorherzusagen und damit den tierbasierten Draize-Augenreizungstest vollends zu ersetzen. Gründe hierfür sind fehlende physiologische Merkmale im Modell sowie eine destruktive Analysemethode.
Aufgrund dessen wurden in dieser Studie die Hypothesen getestet, ob ein verbessertes In-vitro-Modell oder eine zerstörungsfreie, hochsensitive Analysemethode die Vorher-sagekraft des Augenreizungstests verbessern können. Dafür wurden zunächst neue Mo-delle aus humanen Hornhaut- und Hautepithelzellen entwickelt. Die Modelle aus pri-mären cornealen Zellen zeigten eine gewebespezifische Expression der Marker Zytokera-tin 3 und 12 sowie Loricrin. In beiden Modellen konnte durch die Verkürzung der Kul-turdauer die Ausbildung einer Hornschicht verhindert werden. Die Modelle wiesen dadurch eine sensiblere Barriere vergleichbar der nativen Cornea auf. Darüber hinaus konnte durch die chemische Quervernetzung mit Polyethylenglykolsuccinimidylglutara-tester ein transparentes, nicht kontrahierendes Stroma-Äquivalent etabliert werden. Der Stroma-Ersatz konnte zur Generierung von Hemi- und Voll-Cornea-Äquivalenten einge-setzt werden und lieferte somit erste Ansatzpunkte für die Rekonstruktion der nativen Hornhaut.
Parallel dazu konnte ein zerstörungsfreies Analyseverfahren basierend auf der Impe-danzspektroskopie entwickelt werden, das wiederholte Messungen der Gewebeintegri-tät zulässt. Zur verbesserten Messung der Barriere in dreidimensionalen Modelle wurde hierfür ein neuer Parameter, der transepitheliale elektrische Widerstand (TEER) bei der Frequenz von 1000 Hz, der TEER1000 Hz definiert, der eine genauere Aussage über die Integrität der Modelle zulässt. Durch die Kombination der entwickelten cornealen Epithelzellmodelle mit der TEER1000 Hz-Messung konnte die Prädikitivität des Augenrei-zungstests auf 78 - 100 % erhöht werden. Von besonderer Bedeutung ist dabei, dass die nicht destruktive Messung des TEER1000 Hz zum ersten Mal erlaubte, die Persistenz von Irritationen durch wiederholte Messungen in einem in vitro-Modell zu erkennen und somit die GHS-Kategorie 1 von GHS-Kategorie 2 zu unterscheiden. Der wissenschaftli-che Gewinn dieser Forschungsarbeit ist ein neues Testverfahren, das alle GHS-Kategorien in einem einzigen in vitro-Test nachweisen und den Draize-Augenreizungstest gänzlich ersetzen kann.
Herzschrittmachersysteme sind eine weitverbreitete Möglichkeit Herz-Kreislauf-Erkrankungen zu behandeln. Wegen der natürlichen Reaktion des Immunsystems auf Fremdkörper, erfolgt aber eine fortschreitende Verkapselung der Herzschrittmacherelektrode. Die Folge ist eine ansteigende Verminderung der Stimulationseffizienz durch Erhöhung der Anregungsschwelle. Die Integration der Elektrode in das Gewebe ist dabei mangelhaft und wird bestimmt durch Implantateigenschaften wie Größe, Flexibilität und Dimensionalität. Um die Integration zu verbessern, stellen dreidimensionale (3D) bzw. gewebeartige Elektroden eine Alternative zu den derzeit verwendeten planaren Metallelektroden dar. Zur Entwicklung einer leitfähigen, 3D und faserförmigen Elektrode wurden in dieser Arbeit Kohlenstoff-Nanofaser-Scaffolds über Elektrospinnen hergestellt. Durch die Modifikation des Fasergerüstes mit Natriumchlorid (NaCl) während der Scaffoldherstellung, konnte das Fasernetzwerk aufgelockert und Poren generiert werden. Die Kohlenstofffaser-Elektroden zeigten einen effizienten Energieübertrag, welcher vergleichbar mit heutigen Titannitrid (TiN) -Elektroden ist. Die Auflockerung des Fasergewebes hatte eine verbesserte Flexibilität des Faserscaffolds zu Folge. Neben der Flexibilität, konnte auch die Infiltration von Zellen in das poröse Faserscaffold erheblich verbessert werden. Dabei konnten Fibroblasten durch das gesamte Scaffold migrieren. Die Kompatibilität mit kardialen Zellen, die Grundvoraussetzung von Herzschrittmacherelektroden, wurde in vitro nachgewiesen. Durch die Kombination aus dem 3D-Elektrodengerüst mit einer Co-Kultur aus humanen Kardiomyozyten, mesenchymalen Stammzellen und Fibroblasten, erfolgte eine Einbettung der Elektrode in funktionelles kardiales Gewebe. Dadurch konnte ein lebender Gewebe-Elektroden-Hybrid generiert werden, welcher möglicherweise die Elektrode vor Immunzellen in vivo abschirmen kann. Eine Zusammenführung der hybriden Elektrode mit einen Tissue-Engineerten humanen kardialen Patch in vitro, führte zu Bildung einer nahtlosen Elektronik-Gewebe-Schnittstelle. Die fusionierte Einheit wurde abschließend auf ihre mechanische Belastbarkeit getestet und konnte über einen Elektroden-Anschluss elektrisch stimuliert werden.