Lehrstuhl für Tissue Engineering und Regenerative Medizin
Refine
Has Fulltext
- yes (24)
Is part of the Bibliography
- yes (24)
Document Type
- Doctoral Thesis (24)
Keywords
- Tissue Engineering (24) (remove)
Institute
Sonstige beteiligte Institutionen
Electrochemical impedance spectroscopy (EIS) is a valuable technique analyzing electrochemical behavior of biological systems such as electrical characterization of cells and biomolecules, drug screening, and biomaterials in biomedical field. In EIS, an alternating current (AC) power signal is applied to the biological system, and the impedance of the system is measured over a range of frequencies.
In vitro culture models of endothelial or epithelial barrier tissue can be achieved by culturing barrier tissue on scaffolds made with synthetic or biological materials that provide separate compartments (apical and basal sides), allowing for further studies on drug transport. EIS is a great candidate for non-invasive and real-time monitoring of the electrical properties that correlate with barrier integrity during the tissue modeling. Although commercially available transendothelial/transepithelial electrical resistance (TEER) measurement devices are widely used, their use is particularly common in static transwell culture. EIS is considered more suitable than TEER measurement devices in bioreactor cultures that involve dynamic fluid flow to obtain accurate and reliable measurements. Furthermore, while TEER measurement devices can only assess resistance at a single frequency, EIS measurements can capture both resistance and capacitance properties of cells, providing additional information about the cellular barrier's characteristics across various frequencies. Incorporating EIS into a bioreactor system requires the careful optimization of electrode integration within the bioreactor setup and measurement parameters to ensure accurate EIS measurements. Since bioreactors vary in size and design depending on the purpose of the study, most studies have reported using an electrode system specifically designed for a particular bioreactor. The aim of this work was to produce multi-applicable electrodes and established methods for automated non-invasive and real-time monitoring using the EIS technique in bioreactor cultures. Key to the electrode material, titanium nitride (TiN) coating was fabricated on different substrates (materials and shape) using physical vapor deposition (PVD) and housed in a polydimethylsiloxane (PDMS) structure to allow the electrodes to function as independent units. Various electrode designs were evaluated for double-layer capacitance and morphology using EIS and scanning electron microscopy (SEM), respectively. The TiN-coated tube electrode was identified as the optimal choice. Furthermore, EIS measurements were performed to examine the impact of influential parameters related to culture conditions on the TiN-coated electrode system. In order to demonstrate the versatility of the electrodes, these electrodes were then integrated into in different types of perfusion bioreactors for monitoring barrier cells. Blood-brain barrier (BBB) cells were cultured in the newly developed dynamic flow bioreactor, while human umblical vascular endothelial cells (HUVECs) and Caco-2 cells were cultured in the miniature hollow fiber bioreactor (HFBR). As a result, the TiN-coated tube electrode system enabled investigation of BBB barrier integrity in long-term bioreactor culture. While EIS measurement could not detect HUVECs electrical properties in miniature HFBR culture, there was the possibility of measuring the barrier integrity of Caco-2 cells, indicating potential usefulness for evaluating their barrier function. Following the bioreactor cultures, the application of the TiN-coated tube electrode was expanded to hemofiltration, based on the hypothesis that the EIS system may be used to monitor clotting or clogging phenomena in hemofiltration. The findings suggest that the EIS monitoring system can track changes in ion concentration of blood before and after hemofiltration in real-time, which may serve as an indicator of clogging of filter membranes. Overall, our research demonstrates the potential of TiN-coated tube electrodes for sensitive and versatile non-invasive monitoring in bioreactor cultures and medical devices.
Lung cancer is the main cause of cancer-related deaths worldwide. Despite the availability of several targeted therapies and immunotherapies in the clinics, the prognosis for lung cancer remains poor. A major problem for the low benefit of these therapies is intrinsic and acquired resistance, asking for pre-clinical models for closer investigation of predictive biomarkers for refined personalized medicine and testing of possible combination therapies as well as novel therapeutic approaches to break resistances.
One third of all lung adenocarcinoma harbor mutations in the KRAS gene, of which 39 % are transitions from glycine to cysteine in codon 12 (KRASG12C). Being considered “undruggable” in previous decades, KRASG12C-inhibitors now paved the way into the standard-of-care for lung adenocarcinoma treatment in the clinics. Still, the overall response rates as well as overall survival of patients treated with KRASG12C-inhibitors are sobering. Therefore, 3D KRASG12C-biomarker in vitro models were developed based on a decellularized porcine jejunum (SISmuc) using commercial and PDX-derived cell lines and characterized in regards of epithelial-mesenchymal-transition (EMT), stemness, proliferation, invasion and c-MYC expression as well as the sensitivity towards KRASG12C-inhibiton. The phenotype of lung tumors harboring KRAS mutations together with a c-MYC overexpression described in the literature regarding invasion and proliferation for in vivo models was well represented in the SISmuc models. A higher resistance towards targeted therapies was validated in the 3D models compared to 2D cultures, while reduced viability after treatment with combination therapies were exclusively observed in the 3D models. In the test system neither EMT, stemness nor the c-MYC expression were directly predictive for drug sensitivity. Testing of a panel of combination therapies, a sensitizing effect of the aurora kinase A (AURKA) inhibitor alisertib for the KRASG12C-inhibitor ARS-1620 directly correlating with the level of c-MYC expression in the corresponding 3D models was observed. Thereby, the capability of SISmuc tumor models as an in vitro test system for patient stratification was demonstrated, holding the possibility to reduce animal experiments.
Besides targeted therapies the treatment of NSCLC with oncolytic viruses (OVs) is a promising approach. However, a lack of in vitro models to test novel OVs limits the transfer from bench to bedside. In this study, 3D NSCLC models based on the SISmuc were evaluated for their capability to perform efficacy and risk assessment of oncolytic viruses (OVs) in a pre-clinical setting. Hereby, the infection of cocultures of tumor cells and fibroblasts on the SISmuc with provided viruses demonstrated that in contrast to a wildtype herpes simplex virus 1 (HSV-1) based OV, the attenuated version of the OV exhibited specificity for NSCLC cells with a more advanced and highly proliferative phenotype, while fibroblasts were no longer permissive for infection. This approach introduced SISmuc tumor models as novel test system for in vitro validation of OVs.
Finally, a workflow for validating the efficacy of anti-cancer therapies in 3D tumor spheroids was established for the transfer to an automated platform based on a two-arm-robot system. In a proof-of-concept process, H358 spheroids were characterized and treated with the KRASG12C-inhibitor ARS-1620. A time- and dose-dependent reduction of the spheroid area after treatment was defined together with a live/dead-staining as easy-to-perform and cost-effective assays for automated drug testing that can be readily performed in situ in an automated system.
Einleitung: Strukturelle Defekte der gastrointestinalen Hohlorgane stellen ein allgegen-wärtiges Problem im klinischen Alltag dar. Sie entstehen meist auf dem Boden einer ent-zündlichen oder tumorösen Grunderkrankung und können außerdem traumatisch sowie durch medizinische Eingriffe hervorgerufen werden. In der Folge kommt es zur Kontami-nation des umliegenden Gewebes mit Magen- bzw. Darminhalt, wodurch deletäre Folgen wie eine systemische Infektion, also eine Sepsis mit Multiorganversagen drohen können. Vor diesem Hintergrund sind gastrointestinale Defekte immer als potenziell lebensbedroh-lich für den Patienten zu betrachten. Die adäquate und kausale Behandlung erfolgt je nach Ätiologie und Zustand des Patienten durch eine Operation oder eine endoskopische Inter-vention. Hierzu stehen zahlreiche etablierte, operative und interventionelle Therapieme-thoden zur Verfügung. In manchen Fällen stoßen die etablierten Techniken jedoch an ihre Grenzen. Bei Patienten mit schwerwiegenden Komorbiditäten oder im Rahmen neuer me-dizinischer Verfahren sind Innovationen gefragt. Die Grundidee der vorliegenden Arbeit ist die Entwicklung einer biotechnologischen Therapieoption zur Versorgung gastrointesti-naler Hohlorganperforationen.
Methoden: Zur Durchführung einer Machbarkeitsstudie wurden zehn Göttinger Mi-nischweine in zwei Gruppen mit jeweils 5 Tieren aufgeteilt. Den Tieren der Experimental-gruppe wurden Hautbiopsien entnommen und daraus Fibroblasten isoliert, welche vo-rübergehend konserviert wurden. Unter Verwendung von azellularisiertem Schweinedarm erfolgte die Herstellung von Implantaten nach den Prinzipien des Tissue Engineerings. Die Tiere beider Gruppen wurden einer Minilaparotomie und einer ca. 3cm-Inzision der Ma-genvorderwand unterzogen. Die anschließende Versorgung wurde in der Experimental-gruppe durch Implantation der neuartigen Konstrukte erzielt. In der Kontrollgruppe wur-de im Sinne des Goldstandards eine konventionelle Naht durchgeführt. Anschließend wurden die Tiere für vier Wochen beobachtet. Eine bzw. zwei Wochen nach dem pri-mären Eingriff wurde bei allen Tieren beider Gruppen eine Laparoskopie bzw. Gastrosko-pie durchgeführt. Am Ende der klinischen Observationsphase wurden die Versuchstiere getötet und die entsprechenden Magenareale zur histologischen Untersuchung explantiert.
Ergebnisse: Die Herstellung der Implantate konnte auf der Basis standardisierter zellbio-logischer Methoden problemlos etabliert werden. Alle Tiere beider Gruppen überlebten den Primäreingriff sowie das vierwöchige Nachbeobachtungsintervall und zeigten dabei keine klinischen Zeichen möglicher Komplikationen. Die durchgeführten Laparoskopien und Gastroskopien ergaben bei keinem der Tiere Hinweise auf Leckagen oder lokale Infek-tionsprozesse. Die histologische Aufarbeitung zeigte im Bereich des ursprünglichen De-fekts eine bindegewebige Überbrückung sowie ein beginnendes Remodeling der Magen-schleimhaut in beiden Gruppen.
Schlussfolgerungen: Durch die Verknüpfung von Einzelprozessen der Zellkultur und dem Großtier-OP konnte ein neues Verfahren zum Verschluss gastrointestinaler Defekt erfolgreich demonstriert und etabliert werden. Das Projekt konnte reibungslos durchge-führt werden und lieferte Ergebnisse, die dem Goldstandard nicht unterlegen waren. Auf-grund der kleinen Fallzahl und weiterer methodischer Limitationen sind jedoch nur einge-schränkt Schlussfolgerungen möglich, weshalb die Durchführung größerer und gut geplan-ter Studien notwendig ist. Die Erkenntnisse dieser Pilotstudie liefern eine solide Basis für die Planung weiterführender Untersuchungen.
Das maligne Melanom nimmt als Tumorerkrankung mit hoher Metastasierungsrate und steigenden Inzidenzraten bei höchster Mortalität aller Hauttumoren eine zunehmende Bedeutung in der modernen Onkologie ein. Frühzeitige Diagnosemöglichkeiten und moderne Behandlungen konnten das Überleben der Patienten bereits erheblich verbessern. Jedoch besteht nach wie vor Bedarf an geeigneten Modellen, um die Melanomprogression vollständig zu verstehen und neue wirksame Therapien zu entwickeln. Hierfür werden häufig Tiermodelle verwendet, diese spiegeln jedoch nicht die menschliche Mikroumgebung wider. Zweidimensionalen Zellkulturen fehlen dagegen entscheidende Elemente der Tumormikroumgebung. Daher wurde in dieser Arbeit ein dreidimensionales epidermales Tumormodell des malignen Melanoms, welches aus primären humanen Keratinozyten und verschiedenen Melanomzelllinien besteht, entwickelt. Die eingesetzten Melanomzelllinien variieren in ihren Treibermutationen, wodurch das Modell in der Lage ist, Wirkstoffe zu untersuchen, die spezifisch auf diese Mutationen wirken. Mit Techniken des Tissue Engineerings konnte ein dreidimensionales Hautmodell aufgebaut werden, das alle charakteristischen Schichten der Epidermis aufweist und im Bereich des stratum basale Melanomcluster ausbildet. Diese reichen je nach Größe und Ausdehnung bis in suprabasale Epidermisschichten hinein. Die Tumor-Histopathologie, der Tumorstoffwechsel sowie tumorassoziierte Proteinsekretionen ließen sich im in vitro Modell nachweisen. Darüber hinaus konnte ein Protokoll entwickelt werden, mit dem einzelne Zellen aus den Modellen reisoliert werden können. Dies ermöglichte es, den Proliferationszustand innerhalb des jeweiligen Modells zu charakterisieren und die Wirkung von Antitumortherapien gezielt zu bewerten. Die Anwendbarkeit als Testsystem im Bereich der Tumortherapeutika wurde mit dem in der Klinik häufig verwendeten v-raf-Maus-Sarkom-Virus-Onkogen-Homolog B (BRAF)-Inhibitor Vemurafenib demonstriert. Der selektive BRAF-Inhibitor reduzierte erfolgreich das Tumorwachstum in den Modellen mit BRAF-mutierten Melanomzellen, was durch eine Verringerung der metabolischen Aktivität, der proliferierenden Zellen und des Glukoseverbrauchs gezeigt wurde. Für die Implementierung des Modells in die präklinische Therapieentwicklung wurde B-B-Dimethylacrylshikonin, ein vielversprechender Wirkstoffkandidat, welcher einen Zellzyklusarrest mit anschließender Apoptose bewirkt, im Modell getestet.
Bei einer Anwendung der Modelle im Bereich der Testung topischer Behandlungen ist eine Barrierefunktion der Modelle notwendig, die der in vivo Situation nahe kommt. Die Barriereeigenschaften der Hautäquivalente wurden durch die Melanomzellen nachweislich nicht beeinflusst, sind aber im Vergleich zur in vivo Situation noch unzureichend. Eine signifikante Steigerung der Hautbarriere konnte durch die Bereitstellung von Lipiden und die Anregung hauteigener Regenerationsprozesse erreicht werden. Über den Nachweis des transepidermalen Wasserverlusts konnte eine Messmethode zur nicht-invasiven Bestimmung der Hautbarriere etabliert und über den Vergleich zur Impedanzspektroskopie validiert werden. Hierbei gelang es, erstmals die Korrelation der Hautmodelle zur in vivo Situation über ein solches Verfahren zu zeigen. Das entwickelte epidermale Modell konnte durch die Integration eines dermalen Anteils und einer Endothelzellschicht noch weiter an die komplexe Struktur und Physiologie der Haut angepasst werden um Untersuchungen, die mit der Metastierung und Invasion zusammenhängen, zu ermöglichen. Die artifizielle Dermis basiert auf einem Kollagen-Hydrogel mit primären Fibroblasten. Eine dezellularisierte Schweinedarmmatrix ließ sich zur Erweiterung des Modells um eine Endothelzellschicht nutzen. Dabei wanderten die primären Fibroblasten apikal in die natürliche Schweindarmmatrix ein, während die Endothelzellen basolateral eine geschlossene Schicht bildeten.
Die in dieser Arbeit entwickelten Gewebemodelle sind in der Lage, die Vorhersagekraft der in vitro Modelle und die in vitro - in vivo Korrelation zu verbessern. Durch die Kombination des Melanommodells mit einer darauf abgestimmten Analytik wurde ein neuartiges Werkzeug für die präklinische Forschung zur Testung von pharmazeutischen Wirkstoffen geschaffen.
Onchocerciasis, the world's second-leading infectious cause of blindness in humans
–prevalent in Sub-Saharan Africa – is caused by Onchocerca volvulus (O. volvulus), an
obligatory human parasitic filarial worm. Commonly known as river blindness,
onchocerciasis is being targeted for elimination through ivermectin-based mass
drug administration programs. However, ivermectin does not kill adult parasites,
which can live and reproduce for more than 15 years within the human host. These
impediments heighten the need for a deeper understanding of parasite biology and
parasite-human host interactions, coupled with research into the development of
new tools – macrofilaricidal drugs, diagnostics, and vaccines. Humans are the only
definitive host for O. volvulus. Hence, no small-animal models exist for propagating
the full life cycle of O. volvulus, so the adult parasites must be obtained surgically
from subcutaneous nodules. A two-dimensional (2D) culture system allows that
O. volvulus larvae develop from the vector-derived infective stage larvae (L3) in vitro
to the early pre-adult L5 stages. As problematic, the in vitro development of
O. volvulus to adult worms has so far proved infeasible. We hypothesized that an
increased biological complexity of a three-dimensional (3D) culture system will
support the development of O. volvulus larvae in vitro. Thus, we aimed to translate
crucial factors of the in vivo environment of the developing worms into a culture
system based on human skin. The proposed tissue model should contain 1. skinspecific
extracellular matrix, 2. skin-specific cells, and 3. enable a direct contact of
larvae and tissue components. For the achievement, a novel adipose tissue model
was developed and integrated to a multilayered skin tissue comprised of epidermis,
dermis and subcutis. Challenges of the direct culture within a 3D tissue model
hindered the application of the three-layered skin tissue. However, the indirect coculture
of larvae and skin models supported the growth of fourth stage (L4) larvae in
vitro. The direct culture of L4 and adipose tissue strongly improved the larvae
survival. Furthermore, the results revealed important cues that might represent the
initial encapsulation of the developing worm within nodular tissue. These results
demonstrate that tissue engineered 3D tissues represent an appropriate in vitro
environment for the maintenance and examination of O. volvulus larvae.
Die Vordere Kreuzband (VKB)-Ruptur ist eine häufige Verletzung, welche eine hohe individuelle und sozioökonomische Belastung verursacht. Eine etablierte Therapie ist die VKB-Plastik, problematisch sind jedoch die hohen Rerupturraten nach operativer Versorgung. In der Annahme, dass Mesenchymale Stammzellen (MSC) eine bedeutende Rolle für die Heilung spielen, sollte in der vorliegenden Arbeit untersucht werden, ob ein Zusammenhang zwischen Zahl und Qualität der aus dem VKB isolierten MSC sowie der Latenz zwischen Ruptur und Rekonstruktion besteht und so ein optimaler Therapiezeitraum eingegrenzt werden kann.
Zunächst erfolgte die Zellisolierung aus intraoperativ gewonnenen VKB-Biopsien. Je nach Latenz zwischen Ruptur und Operation wurden drei Gruppen (akute ≙ ≤ 30 d, subakute ≙ 31-90 d, verzögerte Rekonstruktion ≙ > 90 d) gebildet. Zum Nachweis von MSC wurden die Zellen hinsichtlich ihrer Plastikadhärenz, eines multipotenten Differenzierungspotentials sowie eines spezifischen Oberflächenantigenmusters (CD73+, CD90+, CD105+, CD34-) untersucht. Zudem wurde ihr Einflusses auf die biomechanischen und histologischen Eigenschaften eines analysiert.
Der Nachweis von MSC war in allen Gruppen möglich. Das Proliferationspotential war in Gruppe II am größten, ebenso der Anteil der MSC an allen Zellen. Er war 5,4% (4,6% - 6,3%, 95% CI; p < 0,001) höher als in Gruppe I und 18,9% (18,2% - 19,6%, 95% CI; p < 0,001) höher als in Gruppe III. In den mit Zellen kultivierten Bandkonstrukten konnte im Gegensatz zu zellfreien Konstrukten humanes Kollagen I nachgewiesen werden. Die Stabilität nahm bei Kultivierung mit Zellen ab.
Die Ergebnisse legen nahe, dass das Regenerationspotential bei subakuter VKB-Rekonstruktion (31-90 d) am höchsten ist. Potenziell ursächlich sind die Regeneration hemmende Entzündungsprozesse zu Beginn sowie degenerative Prozesse im längerfristigen Verlauf. Zudem konnte gezeigt werden, dass die isolierten Zellen die Eigenschaften eines Bandkonstruktes durch Bildung von Kollagen I und Reduktion der Stabilität im kurzfristigen Verlauf verändern und dementsprechend den Therapieerfolg beeinflussen könnten. Zur Verifizierung der Ergebnisse bedarf es weiterer Untersuchungen.
Etablierung eines 3D Gewebemodells für die translationale Forschung am Malignen Pleuramesotheliom
(2022)
Einleitung:
Das maligne Pleuramesotheliom (MPM) ist ein aggressiver von den Mesothelzellen der Pleura ausgehender Tumor, der in der Regel Folge einer Exposition mit Asbest ist. Aufgrund der häufig für ein chirurgisches Vorgehen zu späten Diagnose und des nur unzureichenden Ansprechens des Tumors auf Chemotherapie und Bestrahlung ist die Prognose sehr schlecht. Die präklinische Entwicklung und Testungen neuer Wirkstoffe ist aufgrund eines Mangels an geeigneten in vivo und in vitro Modellen für die biomedizinische Forschung schwierig. Das Ziel der vorliegenden Arbeit war der Aufbau eines 3D Gewebemodells, das die physiologischen Wachstumsverhältnisse und die Tumormikroumgebung des MPM wiedergibt und das als mögliches präklinisches Testmodell eingesetzt werden kann.
Methoden:
Zwei etablierte Zelllinien des MPM, JL-1 und MSTO-211H, wurden auf in Zellkronen eingespannten Segmenten aus azellulärem porzinen Jejunum unter statischen Kulturbedingungen und unter kontinuierlicher Perfusion in einem Bioreaktorsystem kultiviert. Die 3D Gewebemodelle wurden mit 2D Kulturmodellen des Pleuramesothelioms verglichen. Aus OP-Präparaten wurden tumor-assoziierte Fibroblasten (TAF) isoliert, die zum Aufbau von Kokulturmodellen verwendet wurden. Die Modelle wurden histologisch und immunhistologisch charakterisiert (Calretinin etc.).
Ergebnisse:
Die beiden verwendeten Zelllinien bildeten in der statischen Kultur ein mehrschichtiges Gewebe auf der apikalen Oberfläche der Matrix. Im Vergleich mit der 2D Kultur war ein homogeneres Wachstumsmuster der Zellen und eine erniedrigte Proliferationsrate zu beobachten. Die unter dynamischen Bedingungen kultivierten Modelle zeigten deutlich mehr Tumorzellmasse auf der Matrix. Aus Gewebebiopsien eines malignen Pleuramesothelioms von Patienten wurden TAF isoliert und damit 3D Kokulturmodelle aufgebaut. In den Kokulturmodellen migrierten die TAF in die Matrix, während die Tumorzellen weiterhin auf der apikalen Seite wuchsen.
Diskussion
Durch die Kombination mit einem Bioreaktorsystem, das eine bessere Nährstoffversorgung und die Erzeugung von Scherstress ermöglicht, wird das Tumorzellwachstum positiv beeinflusst. Das Wachstum primärer Zellen auf und deren Migration in die Matrix zeigt das Potential für den Aufbau patienten-spezifischer Modelle auf. Die generierten Gewebemodelle stellen eine Grundlage für gewebespezifische Weiterentwicklungen der Modelle für tumorspezifische mechanistische und letztlich auch therapeutische Fragestellungen dar.
Malignant melanoma (MM) is the most dangerous type of skin cancer with rising incidences worldwide. Melanoma skin models can help to elucidate its causes and formation or to develop new treatment strategies. However, most of the current skin models lack a vasculature, limiting their functionality and applicability. MM relies on the vascular system for its own supply and for its dissemination to distant body sites via lymphatic and blood vessels. Thus, to accurately study MM progression, a functional vasculature is indispensable. To date, there are no vascularized skin models to study melanoma metastasis in vitro, which is why such studies still rely on animal experimentation.
In the present thesis, two different approaches for the vascularization of skin models are employed with the aim to establish a vascularized 3D in vitro full-thickness skin equivalent (FTSE) that can serve as a test system for the investigation of the progression of MM.
Initially, endothelial cells were incorporated in the dermal part of FTSEs. The optimal seeding density, a spheroid conformation of the cells and the cell culture medium were tested. A high cell density resulted in the formation of lumen-forming shapes distributed in the dermal part of the model. These capillary-like structures were proven to be of endothelial origin by staining for the endothelial cell marker CD31. The established vascularized FTSE (vFTSE) was characterized histologically after 4 weeks of culture, revealing an architecture similar to human skin in vivo with a stratified epidermis, separated from the dermal equivalent by a basement membrane indicated by collagen type IV. However, this random capillary-like network is not functional as it cannot be perfused.
Therefore, the second vascularization approach focused on the generation of a perfusable tissue construct. A channel was molded within a collagen hydrogel and seeded with endothelial cells to mimic a central, perfusable vessel. The generation and the perfusion culture of the collagen hydrogel was enabled by the use of two custom-made, 3D printed bioreactors. Histological assessment of the hydrogels revealed the lining of the channel with a monolayer of endothelial cells, expressing the cell specific marker CD31.
For the investigation of MM progression in vitro, a 3D melanoma skin equivalent was established. Melanoma cells were incorporated in the epidermal part of FTSEs, representing the native microenvironment of the tumor. Melanoma nests grew at the dermo-epidermal junction within the well stratified epidermis and were characterized by the expression of common melanoma markers. First experiments were conducted showing the feasibility of combining the melanoma model with the vFTSE, resulting in skin models with tumors at the dermo-epidermal junction and lumen-like structures in the dermis.
Taken together, the models presented in this thesis provide further steps towards the establishment of a vascularized, perfusable melanoma model to study melanoma progression and metastasis.
The small intestine represents a strong barrier separating the lumen from blood circulation thereby playing a major role in the absorption and the transport of pharmacological agents prior to their arrival on the respective target site. In order to gain more knowledge about specialized uptake mechanisms and risk assessment for the patient after oral admission of drugs, intestinal in vitro models demonstrating a close similarity to the in vivo situation are needed.
In the past, cell line-based in vitro models composed of Caco-2 cells cultured on synthetic cell carriers represented the “gold standard” in the field of intestinal tissue engineering. Expressive advantages of these models are a reproducible, cost-efficient and standardized model set up, but cell function can be negatively influenced by the low porosity or unwanted molecular adhesion effects of the artificial scaffold material. Natural extracellular matrices (ECM) such as the porcine decellularized small intestinal submucosa (SIS) are used as alternative to overcome some common drawbacks; however, the fabrication of these scaffolds is time- and cost-intensive, less well standardized and the 3Rs (replacement, reduction, refinement) principle is not entirely fulfilled. Nowadays, biopolymer-based scaffolds such as the bacterial nanocellulose (BNC) suggest an interesting option of novel intestinal tissue engineered models, as the BNC shows comparable features to the native ECM regarding fiber arrangement and hydrophilic properties. Furthermore, the BNC is of non-animal origin and the manufacturing process is faster as well as well standardized at low costs.
In this context, the first part of this thesis analyzed the BNC as alternative scaffold to derive standardized and functional organ models in vitro. Therefore, Caco-2 cells were cultured on two versions of BNC with respect to their surface topography, the unmodified BNC as rather smooth surface and the surface-structured BNC presenting an aligned fiber arrangement. As controls, Caco-2 in vitro models were set up on PET and SIS matrices. In this study, the BNC-based models demonstrated organ-specific properties comprising typical cellular morphologies, a characteristic tight junction protein expression profile, representative ultrastructural features and the formation of a tight epithelial barrier together with a corresponding transport activity. In summary, these results validated the high quality of the BNC-based Caco-2 models under cost-efficient conditions and their suitability for pre-clinical research purposes. However, the full functional diversity of the human intestine cannot be presented by Caco-2 cells due to their tumorigenic background and their exclusive representation of mature enterocytes.
Next to the scaffold used for the setup of in vitro models, the cellular unit mainly drives functional performance, which demonstrates the crucial importance of mimicking the cellular diversity of the small intestine in vitro. In this context, intestinal primary organoids are of high interest, as they show a close similarity to the native epithelium regarding their cellular diversity comprising enterocytes, goblet cells, enteroendocrine cells, paneth cells, transit amplifying cells and stem cells. In general, such primary organoids grow in a 3D Matrigel® based environment and a medium formulation supplemented with a variety of growth factors to maintain stemness, to inhibit differentiation and to stimulate cell migration supporting long term in vitro culture.
Intestinal primary spheroid/organoid cultures were set up as Transwell®-like models on both BNC variants, which resulted in a fragmentary cell layer and thereby unfavorable properties of these scaffold materials under the applied circumstances. As the BNC manufacturing process is highly flexible, surface properties could be adapted in future studies to enable a good cell adherence and barrier formation for primary intestinal cells, too. However, the application of these organoid cultures in pre-clinical research represents an enormous challenge, as the in vitro culture is complex and additionally time- and cost-intensive.
With regard to the high potential of primary intestinal spheroids/organoids and the necessity of a simplified but predictive model in pre-clinical research purposes, the second part of this thesis addressed the establishment of a primary-derived immortalized intestinal cell line, which enables a standardized and cost-efficient culture (including in 2D), while maintaining the cellular diversity of the organoid in vitro cultures. In this study, immortalization of murine and human intestinal primary organoids was induced by ectopic expression of a 10- (murine) or 12 component (human) pool of genes regulating stemness and the cell cycle, which was performed in cooperation with the InSCREENeX GmbH in a 2D- and 3D-based transduction strategy. In first line, the established cell lines (cell clones) were investigated for their cell culture prerequisites to grow under simplified and cost-efficient conditions. While murine cell clones grew on uncoated plastic in a medium formulation supplemented with EGF, Noggin, Y-27632 and 10% FCS, the human cell clones demonstrated the necessity of a Col I pre coating together with the need for a medium composition commonly used for primary human spheroid/organoid cultures. Furthermore, the preceding analyses resulted in only one human cell clone and three murine cell clones for ongoing characterization. Studies regarding the proliferative properties and the specific gene as well as protein expression profile of the remaining cell clones have shown, that it is likely that transient amplifying cells (TACs) were immortalized instead of the differentiated cell types localized in primary organoids, as 2D, 3D or Transwell®-based cultures resulted in slightly different gene expression profiles and in a dramatically reduced mRNA transcript level for the analyzed marker genes representative for the differentiated cell types of the native epithelium. Further, 3D cultures demonstrated the formation of spheroid-like structures; however without forming organoid-like structures due to prolonged culture, indicating that these cell populations have lost their ability to differentiate into specific intestinal cell types. The Transwell®-based models set up of each clone exhibit organ-specific properties comprising an epithelial-like morphology, a characteristic protein expression profile with an apical mucus-layer covering the villin-1 positive cell layer, thereby representing goblet cells and enterocytes, together with representative tight junction complexes indicating an integer epithelial barrier. The proof of a functional as well as tight epithelial barrier in TEER measurements and in vivo-like transport activities qualified the established cell clones as alternative cell sources for tissue engineered models representing the small intestine to some extent. Additionally, the easy handling and cell expansion under more cost-efficient conditions compared to primary organoid cultures favors the use of these newly generated cell clones in bioavailability studies.
Altogether, this work demonstrated new components, structural and cellular, for the establishment of alternative in vitro models of the small intestinal epithelium, which could be used in pre-clinical screenings for reproducible drug delivery studies.
Mit jährlich circa 11 Millionen Fällen weltweit, stellen schwere Brandwunden bis heute einen großen Anteil an Verletzungen dar, die in Kliniken behandelt werden müssen. Während leichte Verbrennungen meist problemlos heilen, bedarf die Behandlung tieferer Verbrennungen medizinischer Intervention. Zellbasierte Therapeutika zeigen hier bereits große Erfolge, aufgrund der eingeschränkten Übertragbarkeit von Ergebnissen aus Tiermodellen ist jedoch sowohl die Testung neuer Produkte, als auch die Erforschung der Wundheilung bei Brandwunden noch immer schwierig.
Aufgrund dessen wurden in dieser Arbeit zwei Ziele verfolgt: Die Etablierung von Methoden, um ein zellbasiertes Therapeutikum produzieren zu können und die Entwicklung eines Modells zur Untersuchung von Verbrennungswunden. Zunächst wurden hierfür die Kulturbedingungen und -protokolle zur Isolation und Expansion von Keratinozyten so angepasst, dass sie gängigen Regularien zur Produktion medizinischer Produkte entsprechen. Hier zeigten die Zellen auch in anschließenden Analysen, dass charakteristische Merkmale nicht verloren hatten. Darüber hinaus gelang es, die Zellen mithilfe verschiedener protektiver Substanzen erfolgreich einzufrieren und zu konservieren.
Des Weiteren konnte ein Modell etabliert werden, das eine Verbrennung ersten Grades widerspiegelt. Über einen Zeitraum von zwei Wochen wurde seine Regeneration hinsichtlich verschiedener Aspekte, wie der Histomorphologie, dem Metabolismus und der Reepithelialisierungsrate, untersucht. Die Modelle zeigten hier viele Parallelen zur Wundheilung in vivo auf. Um die Eignung der Modelle zur Testung von Wirkstoffen zu ermitteln wurde außerdem eine Behandlung mit 5% Dexpanthenol getestet. Sie resultierte in einer verbesserten Histomorphologie und einer erhöhten Anzahl an proliferativen Zellen in den Modellen, beschleunigte jedoch die Reepithelialisierung nicht. Zusammengefasst konnten in dieser Arbeit zunächst Methoden etabliert werden, um ein medizinisches Produkt aus Keratinozyten herzustellen und zu charakterisieren. Außerdem wurde ein Modell entwickelt, anhand dessen die Wundheilung und Behandlung von Verbrennungen ersten Grades untersucht werden kann und welches als Basis zur Entwicklung von Modellen von tieferen Verbrennungen dienen kann.