Abteilung für Funktionswerkstoffe der Medizin und der Zahnheilkunde
Refine
Has Fulltext
- yes (167)
Is part of the Bibliography
- yes (167)
Year of publication
Document Type
- Journal article (95)
- Doctoral Thesis (71)
- Preprint (1)
Keywords
- 3D printing (14)
- melt electrowriting (14)
- Knochenzement (13)
- additive manufacturing (12)
- biofabrication (11)
- 3D-Druck (8)
- melt electrospinning writing (8)
- Calciumphosphat (7)
- Hydrogel (7)
- Magnesiumphosphate (7)
- hyaluronic acid (7)
- tissue engineering (7)
- bioprinting (6)
- polycaprolactone (6)
- Tissue Engineering (5)
- bioink (5)
- hydrogels (5)
- magnesium phosphate cement (5)
- Biomaterial (4)
- Calciumphosphate (4)
- Knochenkleber (4)
- Knochenzemente (4)
- Polymere (4)
- Struvit (4)
- biomaterials (4)
- bone (4)
- bone adhesive (4)
- bone cement (4)
- extracellular matrix (4)
- hydrogel (4)
- melt electrowriting (MEW) (4)
- phytic acid (4)
- scaffold (4)
- thiol-ene (4)
- Beschichtung (3)
- Biofabrication (3)
- Knochenersatz (3)
- Knochenersatzmaterial (3)
- Nanopartikel (3)
- Scaffold (3)
- angiogenesis (3)
- breast cancer (3)
- calcium phosphate (3)
- calcium phosphate cement (3)
- chondrogenic differentiation (3)
- electrohydrodynamic (3)
- electrohydrodynamics (3)
- mechanical properties (3)
- 3D Bioprinting (2)
- 3D powder printing (2)
- Biodruck (2)
- Biofabrikation (2)
- Calciumhydroxid (2)
- Cement (2)
- Dihydrooxazole (2)
- Electrospinning (2)
- Fluorescence Microscopy (2)
- Gefrierstrukturierung (2)
- Gelatine (2)
- Gerichtete Erstarrung (2)
- Implantat (2)
- Injectability (2)
- Isocyanate (2)
- MSC (2)
- Makrophagen (2)
- Melt Electrowriting (2)
- Melt electrowriting (2)
- Newberyit (2)
- Oberflächenfunktionalisierung (2)
- Polyethylenglykole (2)
- Polyoxazoline (2)
- Ringöffnungspolymerisation (2)
- Tissue engineering (2)
- Wirkstofffreisetzung (2)
- Zement (2)
- Zementpaste (2)
- antibakteriell (2)
- arteriovenous loop (2)
- axial vascularization (2)
- baghdadite (2)
- bioceramic (2)
- biocompatibility (2)
- bioinorganic (2)
- biomedical materials (2)
- cartilage (2)
- cement (2)
- cortical neurons (2)
- dual setting (2)
- dual setting system (2)
- dual-stage crosslinking (2)
- fiber reinforcement (2)
- focal adhesions (2)
- in vitro (2)
- inflammation (2)
- polymer processing (2)
- polymer-peptide-conjugate (2)
- premixed (2)
- printability (2)
- rheology (2)
- shape fidelity (2)
- therapy (2)
- zinc (2)
- (AB)\(_{n}\) segmented copolymers (1)
- 2-Aminoethylphosphonic acid (1)
- 316L stainless-steel (1)
- 3D (1)
- 3D Printing (1)
- 3D Pulverdruck (1)
- 3D cultures (1)
- 3D electrophysiology (1)
- 3D microfiber (1)
- 3D model systems (1)
- 3D neuronal networks (1)
- 3D scaffolds (1)
- 3D tumor model (1)
- 3D-Biodruck (1)
- 3d printing (1)
- ACPC (1)
- ALI culture (1)
- Abbindeverhalten (1)
- Additive Fertigung (1)
- Adenovirus (1)
- Adhäsion (1)
- Adipose Tissue (1)
- Alginate-Gelatine (1)
- Amelogenese (1)
- Anisotropic structures (1)
- Antibiotikafreisetzung (1)
- Antibiotikum (1)
- Arteriosklerose (1)
- Artery Models (1)
- Aspergillose (1)
- Aspergillosis (1)
- Atherosclerosis (1)
- Auflösung (1)
- Baghdadit (1)
- Baghdadite (1)
- Beschichtung von Titandioxid-Nanopartikeln (1)
- Biofabrication of hydrogels (1)
- Biofilm (1)
- Bioharz (1)
- Bioink (1)
- Biokeramik (1)
- Biologischer Abbau (1)
- Bioprinting (1)
- Bioresorption (1)
- Biotinte (1)
- Biozement (1)
- Blockcopolymere (1)
- Bone Cement (1)
- Bone marrow (1)
- Bone-replacement (1)
- Boolesches Netz (1)
- Breast cancer (1)
- Bruschitbeschichtung (1)
- Brustkrebs (1)
- Ca\(^{2+}\)-Imaging (1)
- Calcium Phosphate (1)
- Calcium phosphate (1)
- Calcium phosphate-based biomaterials (1)
- Calcium-Magnesium-Phosphat (1)
- Calcium-Magnesium-Phosphat-Zemente (1)
- Calcium-Magnesium-Phosphates-Cements (1)
- Calciummagnesiumphosphat (1)
- Calciummagnesiumphosphat-Keramik (1)
- Calciumphosphatzemente (1)
- Cartilage (1)
- Cell Sheet Engineering (1)
- Cell adhesion (1)
- Cement Paste (1)
- Ceramic polymer composite (1)
- Chelatbildner (1)
- Chemical modification of biopolymers (1)
- Chondrogenesis (1)
- Chondrogenic differentiation (1)
- Chondrozyten (1)
- Co-Kultur (1)
- Colloidal Stability (1)
- Correlative microscopy (1)
- DLP-SLA (1)
- Dectin-1 (1)
- Degradation (1)
- Druckbarkeit (1)
- Dual setting system (1)
- Dual-setting (1)
- ECM (1)
- Elektrochemische Abscheidung (1)
- Elektrospinnen (1)
- Elektrostatisches Verspinnen (1)
- Endodontie (1)
- Endoprothese (1)
- Extrazelluläre Matrix (1)
- Extrazellulärmatrix (1)
- Fettgewebe (1)
- Fibrin (1)
- Fibroblast (1)
- Fibroblasten (1)
- FluidFM (1)
- FluidFM technology (1)
- Fluoreszenzmarkierung (1)
- Freeze-Structuring (1)
- Freezing (1)
- Functional hydrophilic polymers (1)
- Funktionalisierung <Chemie> (1)
- Funktionalisierung von elektrogesponnenen Fasern (1)
- Funktionswerkstoff (1)
- Galvanische Abscheidung (1)
- GelAGE (1)
- GelMA (1)
- Gene therapy (1)
- Genregulation (1)
- Gewebe (1)
- Geweberegeneration (1)
- Glycidol (1)
- Gold-Nanoparticles (1)
- Granulat (1)
- Granulate (1)
- Granules (1)
- HA modifiedCNF membranes (1)
- HASH (1)
- HEMA (1)
- Hemodynamics (1)
- Hyaluronic Acid (1)
- Hyaluronsäure (1)
- Hydroxylapatit (1)
- Hypertrophy (1)
- Hämodynamik (1)
- IP6 (1)
- Implantatwerkstoff (1)
- In vitro model (1)
- In vivo (1)
- Inhibition (1)
- Injizierbarkeit (1)
- Iron Oxide Nanoparticles (1)
- Janus fibers (1)
- Klebstoff (1)
- Knochen (1)
- Knochenbruch (1)
- Knochenwachs (1)
- Knorpel (1)
- Konjugate (1)
- Korrelative Mikroskopie (1)
- Kupfer (1)
- L929 (1)
- Lactobacillus acidophilus (1)
- Laktobazillen (1)
- MPI (1)
- MPS (1)
- MRI (1)
- Macrophage extracellular traps (1)
- Magnesiumoxid (1)
- Magnesiumphosphat (1)
- Magnesiumphosphatschäume (1)
- Mechanische Aktivierung (1)
- Melt electrospinning (1)
- Mesenchymal stem cell (1)
- Mesenchymale Stromazellen (1)
- Mikrofluidik (1)
- Mikrotumormodell (1)
- Milchsäure (1)
- Milchsäurebakterien (1)
- Modification (1)
- Modifikation (1)
- Modifikation von Biokeramiken (1)
- Morphology (1)
- Multifunctionalisability (1)
- NANOG (1)
- NCO-sP(EO-stat-PO) (1)
- NLRP3 (1)
- Nahtmaterial (1)
- Nanofaser (1)
- Nanogels (1)
- Nanohydrogel (1)
- Nanoparticle Tracking Analysis (1)
- Nanoparticles (1)
- Nanopartikelcharakterisierung (1)
- Nanoröhre (1)
- Nanotubular coatings (1)
- Nanotubuläre Beschichtungen (1)
- Normal breast (1)
- Orale Chirurgie, (1)
- Osteoblast (1)
- Osteochondrales Gewebe (1)
- Osteoklast (1)
- Osteoklastendifferenzierung (1)
- Oxygen diffusion hardening (1)
- PCL (1)
- PEG (1)
- PLGA (1)
- PTEN (1)
- PVD Beschichtung (1)
- PVD coatings (1)
- PVD-Verfahren (1)
- Paste (1)
- Pharmaceutics (1)
- Phosphoserin (1)
- Photopolymerisation (1)
- Poly(2-oxazoline) (1)
- Poly(glycidol)s (1)
- Polyacrylsäure (1)
- Polyacrylsäuren (1)
- Polycaprolacton (1)
- Polyglycidol (1)
- Polylactid-co-Glycolid (1)
- Polymer-Gel (1)
- Polymer-peptide-conjugate (1)
- Polymergehalt (1)
- Polymers (1)
- Polymilchsäure (1)
- Polyoxazolines (1)
- Primary cell lines (1)
- QCM (1)
- RAFT (1)
- RHO (1)
- ROCK (1)
- Rapid Prototyping <Fertigung> (1)
- Regeneration (1)
- Reißfestigkeit (1)
- Rheologie (1)
- Rheology (1)
- Rho GTPases (1)
- S.aureus (1)
- SOX9 (1)
- Sauerstoffdiffusionshärtung (1)
- Scaffold <Tissue Engineering> (1)
- Schiff base chemistry (1)
- Schleuderguss (1)
- Setting Control (1)
- Silber (1)
- Silberdotierung (1)
- Silica precursor (1)
- Sol-gel (1)
- Spheroid (1)
- Stammzelle (1)
- Stanfieldit (1)
- Staphylococcus aureus / drug effects (1)
- Star-shaped poly(ethylene glycol) (1)
- Stem cells plasticity (1)
- Sternpolymere (1)
- Strontium (1)
- Tantal (1)
- Therapeutisches System (1)
- Thermoresponsive Polymere (1)
- Thioether-Poly(glycidol) (1)
- Ti(Ag) Beschichtungen (1)
- Ti(Ag) coatings (1)
- Tierversuch (1)
- Titan (1)
- Titandioxid (1)
- Titanimplantat (1)
- Tricalciumphosphatkeramik (1)
- Tumormicroenvironment (1)
- Tumorstammzellen (1)
- UV-VIS-Spektroskopie (1)
- Unidirectional Freezing (1)
- Universität Würzburg. Lehrstuhl für Bioinformatik (1)
- Vancomycin / administration & dosage (1)
- Vancomycin / chemistry (1)
- Vancomycin / pharmacology (1)
- Vascularization (1)
- Vaskularisation (1)
- Verbundwerkstoff (1)
- Vereinzelung von Partikeln (1)
- Volumetrischer Biodruck (1)
- WST test (1)
- Wasserlösliche Polymere (1)
- Wirkstoff-Träger-System (1)
- Wundinfektion (1)
- Wundnaht (1)
- ZIP (1)
- Zahnentwicklung (1)
- Zahnimplantat (1)
- Zahnmedizin (1)
- Zetapotential (1)
- Zink (1)
- acrylate-endcapped urethane-based polymer (AUP) (1)
- actin (1)
- acute myeloid leukaemia (1)
- adhesion dynamics (1)
- adhesive (1)
- adipose tissue (1)
- adipose tissue engineering (1)
- adipose-derived stromal cells (1)
- agarose (1)
- alginate (1)
- alveolar‐capillary barrier (1)
- amoeboid cell migration (1)
- animal model (1)
- anisotropic porous structures (1)
- anti-bacterial agents / administration & dosage (1)
- anti-bacterial agents / chemistry (1)
- anti-bacterial agents / pharmacology (1)
- antibacterial (1)
- antiinflammatorisch (1)
- arthritis (1)
- artificial bones (1)
- astrocytes (1)
- atomic force microscopy (1)
- azlactone (1)
- balloon kyphoplasty (1)
- bending strength (1)
- bio-printability (1)
- bioceramics (1)
- biocompatible Materials (1)
- biodegradable polymer (1)
- biodegradable polymers (1)
- biofabricated vascular graft (1)
- biofunctional coating (1)
- bioinspired interface (1)
- bioinspired membrane (1)
- biological models (1)
- biomaterial ink (1)
- biomaterials – cells (1)
- biomechanical evaluation (1)
- biomechanics (1)
- biomedical engineering (1)
- biomimetic scaffolds (1)
- biophysics (1)
- biosensor (1)
- biosensors (1)
- blood-plasma (1)
- bohrbar (1)
- bone and cartilage tissue engineering (1)
- bone critical size defect (1)
- bone glue (1)
- bone graft substitutes (1)
- bone replacement material (1)
- bone wax (1)
- bone wires (1)
- brain cancer (1)
- breast cancer model (1)
- brushite cement (1)
- brushite coating (1)
- calcaneus (1)
- calcium phosphate cements (1)
- calcium-phosphate (1)
- calciumhydroxide (1)
- carbon fiber reinforcement (1)
- carbon nanotube microspheres (1)
- cardiovascular pharmacology (1)
- cartilage repair (1)
- cavitation (1)
- cell coagulation (1)
- cell counting (1)
- cell elongation (1)
- cell guidance (1)
- cell migration (1)
- cell morphology (1)
- cell printing (1)
- cell self-assembled monolayers (1)
- cell transplantation (1)
- cell viability (1)
- cement paste (1)
- cements (1)
- centrifugally casting (1)
- ceramic polymer composite (1)
- ceramics (1)
- chemical crosslinking (1)
- chemical engineering (1)
- chemokines (1)
- chemoselective (1)
- chemosensitivity (1)
- chondrocyte (1)
- chondrocytes (1)
- chondroprogenitors (1)
- click chemistry (1)
- co-culture (1)
- coating (1)
- coatings (1)
- cochlea (1)
- collagen (1)
- collagen sponge (1)
- combination of physical vapor deposition and electrochemical etching (1)
- composite material (1)
- compressive strength (1)
- connective tissue (1)
- copper (1)
- crimp structure (1)
- crosslinked coating (1)
- cryostructured scaffolds (1)
- cyclic mechanical stretch (1)
- cyclic stretch (1)
- cyclic testing (1)
- cyto-compatibility (1)
- cytotoxicity (1)
- damage tolerant cement (1)
- deafness (1)
- defects (1)
- defined humanized test system (1)
- definition (1)
- degradable bone substitutes (1)
- degradable implant (1)
- degradation (1)
- detachment force quantification (1)
- dicalcium phosphate cement (1)
- differentation (1)
- digitization (1)
- dihydrate cement (1)
- directional solidification (1)
- disease models (1)
- drillability (1)
- drillable (1)
- drillable bone cement (1)
- drop on demand (1)
- drug delivery (1)
- drug liberation (1)
- drug release (1)
- dual abbindend (1)
- durotaxis (1)
- electroactive (1)
- electroactive polymers (1)
- electrochemical deposition (1)
- electrochemically surface coating (1)
- electrohydrodynamic printing (1)
- electron microscopy (1)
- electrospinning (1)
- electrospun fibers (1)
- elektrochemische Oberflächenbeschichtung (1)
- eletrhydrodynamic (1)
- embedded templating (1)
- endothelial progenitor cells (1)
- expression (1)
- extrusion of hiMPC-containing bioinks alginate + collagen type I (1)
- extrusion-based 3D printing (1)
- factor-I (1)
- farringtonite (1)
- fiber (1)
- fibers (1)
- fiber–matrix interaction (1)
- filopodia (1)
- fixation (1)
- fluidics (1)
- force (1)
- fracture (1)
- free radical polymerization (1)
- functionalization (1)
- funktionale Präpolymere (1)
- gels (1)
- gels and hydrogels (1)
- genregulatorisches Netzwerk (1)
- gentamicin-loaded poly (methyl methacrylate) bone cement (1)
- granules (1)
- growth (1)
- guided bone regeneration (1)
- heart-failure (1)
- hemocompatibility (1)
- heterotypic scaffold design (1)
- human iPSC-derived mesodermal cells (hiMPCs) (1)
- human macrophages (1)
- human neutrophil elastase (HNE) (1)
- hybrid fabrication (1)
- hybrid materials (1)
- hybrid polymers (1)
- hydraulic reactivity (1)
- hydrogel formation (1)
- hydrophilic polymers (1)
- hydroxyapatite (1)
- hypoxia (1)
- imaging agents (1)
- immunomodulation (1)
- implant (1)
- implants (1)
- in vitro cell‐stretch model (1)
- in-vitro-Modell (1)
- in-vivo Micro-Computed Tomography (1)
- inflammatory response (1)
- injectability (1)
- injectable paste (1)
- injizierbare Paste (1)
- inner ear (1)
- inositol hexaphosphate (1)
- intercellular adhesion (1)
- interface control (1)
- iron release (1)
- lamellipodia (1)
- lectin (1)
- left-ventricular function (1)
- load to failure testing (1)
- local drug delivery (1)
- lung cell model (1)
- macrophage polarization (1)
- macrophages (1)
- magnesium phosphate (1)
- magnetic properties (1)
- magnetoactive materials (1)
- material-host interactions (1)
- materials for optics (1)
- materials testing (1)
- mature cell-cell contacts (1)
- mechanical activation (1)
- mechanical performance (1)
- mechanical reinforcement (1)
- mechanische Eigenschaften (1)
- medical device (1)
- medical-grade poly(ε-caprolactone) (1)
- medicine (1)
- melanoma (1)
- melt electrowriting (1)
- melt electrofibrillation (1)
- melt electrospinning (1)
- mesenchymal stem cells (1)
- mesenchymale Stromazellen (1)
- microfibers (1)
- microfibres (1)
- microfluidics (1)
- microstructures (1)
- microvasculature (1)
- migration (1)
- minipig (1)
- modelling (1)
- morphology controls (1)
- mucin (1)
- multilayered vessel wall with intimate, media and adventitia (1)
- myosin-II (1)
- nanofibers (1)
- nanostructures (1)
- nanotopographical surfaces (1)
- native chemical ligation (1)
- networks (1)
- neurite growth (1)
- organ-on-a-chip (1)
- organoids (1)
- organophosphates (1)
- osseointegration (1)
- osteoblasts (1)
- osteochondral defect (1)
- osteogenesis (1)
- osteoporosis (1)
- oxidation (1)
- oxygen reduction reaction (1)
- particle study (1)
- peptide conjugation (1)
- peptide immobilization (1)
- periprosthetic infection (1)
- periprothetische Infektion (1)
- phase conversion (1)
- photo-cross-linkable elastomer (1)
- photo-crosslinking (1)
- photopolymerization (1)
- physicochemical characterization (1)
- plasticizers (1)
- platelet-adhesion (1)
- platelets (1)
- platinum nanostructures (1)
- poly(2-ethyl-2-oxazoline) (1)
- poly(2-oxazoline)s (1)
- poly(ethylene glycol) (1)
- poly(glycidol) (1)
- poly(lactic-co-glycolic acid) (1)
- poly(lactide-co-glycolide) (1)
- polyacrylic acid (1)
- polyethylene glycol (1)
- polyethylenglykole (1)
- polyglycidol (1)
- polylactid (1)
- polymer (1)
- polymer-analogue functionalization (1)
- polymeric matrix (1)
- polymers (1)
- polyoxazoline (1)
- polyoxazolines (1)
- porosity (1)
- postsurgical adhesion (1)
- pre-crosslinking (1)
- premixed paste (1)
- primary vascular smooth muscle‐like cells (vSMCs) (1)
- proliferation (1)
- proosseointegrativ (1)
- properties (1)
- prostheses and implants (1)
- protein adsorption (1)
- präfabriziert (1)
- präfabrizierte Paste (1)
- radiopacity (1)
- rat model (1)
- recruitment (1)
- remodelling (1)
- repair (1)
- rhBMP–2 (1)
- ring opening polymerisation (1)
- ring-opening polymerization (1)
- sPEG (1)
- sacrificial printing (1)
- sanders (1)
- scaffold design (1)
- scaffolds (1)
- screw (1)
- self-assembled monolayers (1)
- serial block face EM (1)
- setting reaction (1)
- shear stress (1)
- shear thinning (1)
- signaling (1)
- silicones (1)
- silver doped titanium dioxide nanoparticles (1)
- sodium alginate (1)
- solution electrospinning (1)
- spherical granules (1)
- spheroids (1)
- sphärische Granulate (1)
- spinning (1)
- stanfieldite (1)
- starPEG (1)
- starPEG hydrogel (1)
- stem cells (1)
- stimulation (1)
- stress (1)
- strontiumdotierte Struvitschichten (1)
- subcutaneous implanation (1)
- sugar glass printing (1)
- surface coating (1)
- surface functionalisation (1)
- surface functionalization (1)
- surfaces (1)
- sutures (1)
- synbones (1)
- synergistic reinforcement (1)
- synthetic hydrogels (1)
- systematic investigations (1)
- tension (1)
- testing (1)
- testing methods (1)
- tethering (1)
- thermoresponsive hydrogel (1)
- thrombin (1)
- thrombosis (1)
- tibial head depression fracture (1)
- tissue morphogenesis (1)
- tissue regeneration (1)
- titanium implant (1)
- toe region mechanical behaviour (1)
- topotaxis (1)
- total joint arthroplasty (1)
- total knee arthroplasty (1)
- traction (1)
- tranexamic acid (1)
- transforming growth factor-beta 1 (1)
- transplantation (1)
- tricalcium phosphate (1)
- tubular constructs (1)
- tumor heterogeneity (1)
- tunable ultra‐thin biphasic membrane (1)
- unidirectional freezing (1)
- vascular biofabrication (1)
- vascular network and hierarchical organized vessels (1)
- vorgemischt (1)
- x-ray micro computed tomography (1)
- zetapotential (1)
- zonal (1)
- zonal construct (1)
- α-tricalcium phosphate (1)
- α‑Tricalciumphosphat (1)
Institute
- Abteilung für Funktionswerkstoffe der Medizin und der Zahnheilkunde (167)
- Klinik und Poliklinik für Unfall-, Hand-, Plastische und Wiederherstellungschirurgie (Chirurgische Klinik II) (14)
- Fakultät für Chemie und Pharmazie (10)
- Graduate School of Life Sciences (10)
- Lehrstuhl für Orthopädie (7)
- Institut für Funktionsmaterialien und Biofabrikation (6)
- Institut für Klinische Neurobiologie (4)
- Klinik und Poliklinik für Mund-, Kiefer- und Plastische Gesichtschirurgie (4)
- Institut für Organische Chemie (3)
- Institut für Pharmazie und Lebensmittelchemie (3)
Sonstige beteiligte Institutionen
The mechanisms underlying the cellular response to extracellular matrices (ECMs) that consist of multiple adhesive ligands are still poorly understood. Here, we address this topic by monitoring specific cellular responses to two different extracellular adhesion molecules – the main integrin ligand fibronectin and galectin-8, a lectin that binds β-galactoside residues − as well as to mixtures of the two proteins. Compared with cell spreading on fibronectin, cell spreading on galectin-8-coated substrates resulted in increased projected cell area, more-pronounced extension of filopodia and, yet, the inability to form focal adhesions and stress fibers. These differences can be partially reversed by experimental manipulations of small G-proteins of the Rho family and their downstream targets, such as formins, the Arp2/3 complex and Rho kinase. We also show that the physical adhesion of cells to galectin-8 was stronger than adhesion to fibronectin. Notably, galectin-8 and fibronectin differently regulate cell spreading and focal adhesion formation, yet act synergistically to upregulate the number and length of filopodia. The physiological significance of the coherent cellular response to a molecularly complex matrix is discussed.
This article has an associated First Person interview with the first author of the paper.
The electrohydrodynamic stabilization of direct-written fluid jets is explored to design and manufacture tissue engineering scaffolds based on their desired fiber dimensions. It is demonstrated that melt electrowriting can fabricate a full spectrum of various fibers with discrete diameters (2–50 µm) using a single nozzle. This change in fiber diameter is digitally controlled by combining the mass flow rate to the nozzle with collector speed variations without changing the applied voltage. The greatest spectrum of fiber diameters was achieved by the simultaneous alteration of those parameters during printing. The highest placement accuracy could be achieved when maintaining the collector speed slightly above the critical translation speed. This permits the fabrication of medical-grade poly(ε-caprolactone) into complex multimodal and multiphasic scaffolds, using a single nozzle in a single print. This ability to control fiber diameter during printing opens new design opportunities for accurate scaffold fabrication for biomedical applications.
One challenge in biofabrication is to fabricate a matrix that is soft enough to elicit optimal cell behavior while possessing the strength required to withstand the mechanical load that the matrix is subjected to once implanted in the body. Here, melt electrowriting (MEW) is used to direct-write poly(ε-caprolactone) fibers “out-of-plane” by design. These out-of-plane fibers are specifically intended to stabilize an existing structure and subsequently improve the shear modulus of hydrogel–fiber composites. The stabilizing fibers (diameter = 13.3 ± 0.3 µm) are sinusoidally direct-written over an existing MEW wall-like structure (330 µm height). The printed constructs are embedded in different hydrogels (5, 10, and 15 wt% polyacrylamide; 65% poly(2-hydroxyethyl methacrylate) (pHEMA)) and a frequency sweep test (0.05–500 rad s−1, 0.01% strain, n = 5) is performed to measure the complex shear modulus. For the rheological measurements, stabilizing fibers are deposited with a radial-architecture prior to embedding to correspond to the direction of the stabilizing fibers with the loading of the rheometer. Stabilizing fibers increase the complex shear modulus irrespective of the percentage of gel or crosslinking density. The capacity of MEW to produce well-defined out-of-plane fibers and the ability to increase the shear properties of fiber-reinforced hydrogel composites are highlighted.
The development of alternatives to vascular bone grafts, the current clinical standard for the surgical repair of large segmental bone defects still today represents an unmet medical need. The subcutaneous formation of transplantable bone has been successfully achieved in scaffolds axially perfused by an arteriovenous loop (AVL) and seeded with bone marrow stromal cells or loaded with inductive proteins. Although demonstrating clinical potential, AVL-based approaches involve complex microsurgical techniques and thus are not in widespread use. In this study, 3D-printed microporous bioceramics, loaded with autologous total bone marrow obtained by needle aspiration, are placed around and next to an unoperated femoral vein for 8 weeks to assess the effect of a central flow-through vein on bone formation from marrow in a subcutaneous site. A greater volume of new bone tissue is observed in scaffolds perfused by a central vein compared with the nonperfused negative control. These analyses are confirmed and supplemented by calcified and decalcified histology. This is highly significant as it indicates that transplantable vascularized bone can be grown using dispensable vein and marrow tissue only. This is the first report illustrating the capacity of an intrinsic vascularization by a single vein to support ectopic bone formation from untreated marrow.
This study approaches the accurate continuous direct-writing onto a cylindrical collector from a mathematical perspective, taking into account the winding angle, cylinder diameter and length required for the final 3D printed tube. Using an additive manufacturing process termed melt electrowriting (MEW), porous tubes intended for tissue engineering applications are fabricated from medical-grade poly(ε-caprolactone) (PCL), validating the mathematically-derived method. For the fabricated tubes in this study, the pore size, winding angle and printed length can all be planned in advance and manufactured as designed. The physical dimensions of the tubes matched theoretical predictions and mechanical testing performed demonstrated that variations in the tubular morphology have a direct impact on their strength. MEWTubes, the web-based application developed and described here, is a particularly useful tool for planning the complex continuous direct writing path required for MEW onto a rotating, cylindrical build surface.
Here, the formation of high surface area microscale assemblies of nanocarbon through phosphate and ultrasound cavitation treatment is reported. Despite high conductivity and large surface area, potential health and safety concerns limit the use of nanocarbon and add challenges to handling. Previously, it is shown that phosphate ultrasonic bonding is ineffective for organic materials but in this study, it is found that by a preliminary oxidizing treatment, several carbons can be readily assembled from xerogels. Assembling nanocarbon into microparticles can usually require a binder or surfactants, which can reduce surface area or conductivity and generate a low microsphere yield. Carbon nanotube microspheres are nitrogen-doped and flower-like nanostructured Pt deposited on their surface, and finally showcased as efficient cathode electrocatalysts for the oxygen reduction reaction (half-wave potential 0.78 V vs reversible hydrogen electrode) and methanol oxidation (417 mA mg−1). In particular, no significant degradation of the catalysts is detected after 12 000 cycles (26.6 h). These results indicate the potential of this multimaterial assembly method and open a new way to improve handling of nanoscale materials.
Melt electrowriting (MEW) is an additive manufacturing technology that is recently used to fabricate voluminous scaffolds for biomedical applications. In this study, MEW is adapted for the seeding of multicellular spheroids, which permits the easy handling as a single sheet-like tissue-scaffold construct. Spheroids are made from adipose-derived stromal cells (ASCs). Poly(ε-caprolactone) is processed via MEW into scaffolds with box-structured pores, readily tailorable to spheroid size, using 13–15 µm diameter fibers. Two 7–8 µm diameter “catching fibers” near the bottom of the scaffold are threaded through each pore (360 and 380 µm) to prevent loss of spheroids during seeding. Cell viability remains high during the two week culture period, while the differentiation of ASCs into the adipogenic lineage is induced. Subsequent sectioning and staining of the spheroid-scaffold construct can be readily performed and accumulated lipid droplets are observed, while upregulation of molecular markers associated with successful differentiation is demonstrated. Tailoring MEW scaffolds with pores allows the simultaneous seeding of high numbers of spheroids at a time into a construct that can be handled in culture and may be readily transferred to other sites for use as implants or tissue models.
Abstract
Ligaments and tendons are comprised of aligned, crimped collagen fibrils that provide tissue-specific mechanical properties with non-linear extension behaviour, exhibiting low stress at initial strain (toe region behaviour). To approximate this behaviour, we report fibrous scaffolds with sinusoidal patterns by melt electrowriting (MEW) below the critical translation speed (CTS) by exploitation of the natural flow behaviour of the polymer melt. More specifically, we synthesised photopolymerizable poly(L-lactide-co-ε-caprolactone-co-acryloyl carbonate) (p(LLA-co-ε-CL-co-AC)) and poly(ε-caprolactone-co-acryloyl carbonate) (p(ε-CL-co-AC)) by ring-opening polymerization (ROP). Single fibre (fØ = 26.8 ± 1.9 µm) tensile testing revealed a customisable toe region with Young’s Moduli ranging from E = 29 ± 17 MPa for the most crimped structures to E = 314 ± 157 MPa for straight fibres. This toe region extended to scaffolds containing multiple fibres, while the sinusoidal pattern could be influenced by printing speed. The synthesized polymers were cytocompatible and exhibited a tensile strength of σ = 26 ± 7 MPa after 104 cycles of preloading at 10% strain while retaining the distinct toe region commonly observed in native ligaments and tendon tissue.
Statement of Significance
Damaged tendons and ligaments are serious and frequently occurring injuries worldwide. Recent therapies, including autologous grafts, still have severe disadvantages leading to a demand for synthetic alternatives. Materials envisioned to induce tendon and ligament regeneration should be degradable, cytocompatible and mimic the ultrastructural and mechanical properties of the native tissue. Specifically, we utilised photo-cross-linkable polymers for additive manufacturing (AM) with MEW. In this way, we were able to direct-write cytocompatible fibres of a few micrometres thickness into crimp-structured elastomer scaffolds that mimic the non-linear biomechanical behaviour of tendon and ligament tissue.
In vitro co-cultures of different primary human cell types are pivotal for the testing and evaluation of biomaterials under conditions that are closer to the human in vivo situation. Especially co-cultures of macrophages and mesenchymal stem cells (MSCs) are of interest, as they are both present and involved in tissue regeneration and inflammatory reactions and play crucial roles in the immediate inflammatory reactions and the onset of regenerative processes, thus reflecting the decisive early phase of biomaterial contact with the host. A co-culture system of these cell types might thus allow for the assessment of the biocompatibility of biomaterials. The establishment of such a co-culture is challenging due to the different in vitro cell culture conditions. For human macrophages, medium is usually supplemented with human serum (hS), whereas hMSC culture is mostly performed using fetal calf serum (FCS), and these conditions are disadvantageous for the respective other cell type. We demonstrate that human platelet lysate (hPL) can replace hS in macrophage cultivation and appears to be the best option for co-cultivation of human macrophages with hMSCs. In contrast to FCS and hS, hPL maintained the phenotype of both cell types, comparable to that of their respective standard culture serum, as well as the percentage of each cell population. Moreover, the expression profile and phagocytosis activity of macrophages was similar to hS.
Fused silica glass is the preferred material for applications which require long-term chemical and mechanical stability as well as excellent optical properties. The manufacturing of complex hollow microstructures within transparent fused silica glass is of particular interest for, among others, the miniaturization of chemical synthesis towards more versatile, configurable and environmentally friendly flow-through chemistry as well as high-quality optical waveguides or capillaries. However, microstructuring of such complex three-dimensional structures in glass has proven evasive due to its high thermal and chemical stability as well as mechanical hardness. Here we present an approach for the generation of hollow microstructures in fused silica glass with high precision and freedom of three-dimensional designs. The process combines the concept of sacrificial template replication with a room-temperature molding process for fused silica glass. The fabricated glass chips are versatile tools for, among other, the advance of miniaturization in chemical synthesis on chip.
In der vorliegenden Dissertationsarbeit wurden Sphäroide aus mesenchymalen Stammzellen aus dem Fettgewebe oder dem Knochenmark mittels der Micromold-Methode hergestellt. Den Sphäroiden wurden entweder Calciumphosphat- oder Calcium-Magnesium-Phosphat-Partikel hinzugefügt. Zum einen sollte überprüft werden, ob die Zugabe von Partikeln die osteogene Differenzierung der Sphäroide fördert und somit zur weiteren Entwicklung von körpereigenem Knochenersatzmaterial in der regenerativen Medizin beiträgt. Zum anderen sollte festgestellt werden, ob eine der beiden Biokeramiken hinsichtlich der osteogenen Differenzierung überlegen ist.
The use of bone-cement-enforced osteosynthesis is a growing topic in trauma surgery. In this context, drillability is a desirable feature for cements that can improve fracture stability, which most of the available cement systems lack. Therefore, in this study, we evaluated a resorbable and drillable magnesium-phosphate (MgP)-based cement paste considering degradation behavior and biocompatibility in vivo. Two different magnesium-phosphate-based cement (MPC) pastes with different amounts of phytic acid (IP 6) as setting retarder (MPC 22.5 and MPC 25) were implanted in an orthotopic defect model of the lateral femoral condyle of New Zealand white rabbits for 6 weeks. After explantation, their resorption behavior and material characteristics were evaluated by means of X-ray diffraction (XRD), porosimetry measurement, histological staining, peripheral quantitative computed tomography (pQCT), cone-beam computed tomography (CBCT) and biomechanical load-to-failure tests. Both cement pastes displayed comparable results in mechanical strength and resorption kinetics. Bone-contact biocompatibility was excellent without any signs of inflammation. Initial resorption and bone remodeling could be observed. MPC pastes with IP 6 as setting retardant have the potential to be a valuable alternative in distinct fracture patterns. Drillability, promising resorption potential and high mechanical strength confirm their suitability for use in clinical routine.
Zinc (Zn2+) is considered as important mediator of immune cell function, thrombosis and haemostasis. However, our understanding of the transport mechanisms that regulate Zn2+ homeostasis in platelets is limited. Zn2+ transporters, ZIPs and ZnTs, are widely expressed in eukaryotic cells. Using mice globally lacking ZIP1 and ZIP3 (ZIP1/3 DKO), our aim was to explore the potential role of these Zn2+ transporters in maintaining platelet Zn2+ homeostasis and in the regulation of platelet function. While ICP-MS measurements indicated unaltered overall Zn2+ concentrations in platelets of ZIP1/3 DKO mice, we observed a significantly increased content of FluoZin3-stainable free Zn2+, which, however, appears to be released less efficiently upon thrombin-stimulated platelet activation. On the functional level, ZIP1/3 DKO platelets exhibited a hyperactive response towards threshold concentrations of G protein-coupled receptor (GPCR) agonists, while immunoreceptor tyrosine-based activation motif (ITAM)-coupled receptor agonist signalling was unaffected. This resulted in enhanced platelet aggregation towards thrombin, bigger thrombus volume under flow ex vivo and faster in vivo thrombus formation in ZIP1/3 DKO mice. Molecularly, augmented GPCR responses were accompanied by enhanced Ca2+ and PKC, CamKII and ERK1/2 signalling. The current study thereby identifies ZIP1 and ZIP3 as important regulators for the maintenance of platelet Zn2+ homeostasis and function.
Reinforcing hydrogels with micro-fibre scaffolds obtained by a Melt-Electrospinning Writing (MEW) process has demonstrated great promise for developing tissue engineered (TE) constructs with mechanical properties compatible to native tissues. However, the mechanical performance and reinforcement mechanism of the micro-fibre reinforced hydrogels is not yet fully understood. In this study, FE models, implementing material properties measured experimentally, were used to explore the reinforcement mechanism of fibre-hydrogel composites. First, a continuum FE model based on idealized scaffold geometry was used to capture reinforcement effects related to the suppression of lateral gel expansion by the scaffold, while a second micro-FE model based on micro-CT images of the real construct geometry during compaction captured the effects of load transfer through the scaffold interconnections. Results demonstrate that the reinforcement mechanism at higher scaffold volume fractions was dominated by the load carrying-ability of the fibre scaffold interconnections, which was much higher than expected based on testing scaffolds alone because the hydrogel provides resistance against buckling of the scaffold. We propose that the theoretical understanding presented in this work will assist the design of more effective composite constructs with potential applications in a wide range of TE conditions.
In vitro models mimic the tissue-specific anatomy and play essential roles in personalized medicine and disease treatments. As a sophisticated manufacturing technology, 3D printing overcomes the limitations of traditional technologies and provides an excellent potential for developing in vitro models to mimic native tissue. This thesis aims to investigate the potential of a high-resolution 3D printing technology, melt electrowriting (MEW), for fabricating in vitro models. MEW has a distinct capacity for depositing micron size fibers with a defined design. In this thesis, three approaches were used, including 1) extending the MEW polymer library for different biomedical applications, 2) developing in vitro models for evaluation of cell growth and migration toward the different matrices, and 3) studying the effect of scaffold designs and biochemical cues of microenvironments on cells.
First, we introduce the MEW processability of (AB)n and (ABAC)n segmented copolymers, which have thermally reversible network formulation based on physical crosslinks. Bisurea segments are combined with hydrophobic poly(dimethylsiloxane) (PDMS) or hydrophilic poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEG-PPO) segments to form the (AB)n segmented copolymers. (ABAC)n segmented copolymers contain all three segments: in addition to bisurea, both hydrophobic and hydrophilic segments are available in the same polymer chain, resulting in tunable mechanical and biological behaviors. MEW copolymers either support cells attachment or dissolve without cytotoxic side effects when in contact with the polymers at lower concentrations, indicating that this copolymer class has potential in biological applications. The unique biological and surface properties, transparency, adjustable hydrophilicity of these copolymers could be beneficial in several in vitro models.
The second manuscript addresses the design and development of a melt electrowritten competitive 3D radial migration device. The approach differs from most of the previous literature, as MEW is not used here to produce cell invasive scaffolds but to fabricate an in vitro device. The device is utilized to systematically determine the matrix which promotes cell migration and growth of glioblastoma cells. The glioblastoma cell migration is tested on four different Matrigel concentrations using a melt electrowritten radial device. The glioblastoma U87 cell growth and migration increase at Matrigel concentrations 6 and 8 mg mL-1 In the development of this radial device, the accuracy, and precision of melt electrowritten circular shapes were investigated. The results show that the printing speed and design diameter are essential parameters for the accuracy of printed constructs. It is the first instance where MEW is used for the production of in vitro devices.
The influence of biochemical cues and scaffold designs on astrocytes and glioblastoma is investigated in the last manuscript. A fiber comprising the box and triangle-shaped pores within MEW scaffolds are modified with biochemical cues, including RGD and IKVAV peptides using a reactive NCO-sP(EO-stat-PO) macromer. The results show that astrocytes and glioblastoma cells exhibit different phenotypes on scaffold designs and peptide-coated scaffolds.
Present surgical situations require a bone adhesive which has not yet been developed for use in clinical applications. Recently, phosphoserine modified cements (PMC) based on mixtures of o-phosphoserine (OPLS) and calcium phosphates, such as tetracalcium phosphate (TTCP) or α-tricalcium phosphate (α-TCP) as well as chelate setting magnesium phosphate cements have gained increasing popularity for their use as mineral bone adhesives. Here, we investigated new mineral-organic bone cements based on phosphoserine and magnesium phosphates or oxides, which possess excellent adhesive properties. These were analyzed by X-ray diffraction, Fourier infrared spectroscopy and electron microscopy and subjected to mechanical tests to determine the bond strength to bone after ageing at physiological conditions. The novel biomineral adhesives demonstrate excellent bond strength to bone with approximately 6.6–7.3 MPa under shear load. The adhesives are also promising due to their cohesive failure pattern and ductile character. In this context, the new adhesive cements are superior to currently prevailing bone adhesives. Future efforts on bone adhesives made from phosphoserine and Mg2+ appear to be very worthwhile.
Augmenting the vascular supply to generate new tissues, a crucial aspect in regenerative medicine, has been challenging. Recently, our group showed that calcium phosphate can induce the formation of a functional neo-angiosome without the need for microsurgical arterial anastomosis. This was a preclinical proof of concept for biomaterial-induced luminal sprouting of large-diameter vessels. In this study, we investigated if sprouting was a general response to surgical injury or placement of an inorganic construct around the vessel. Cylindrical biocement scaffolds of differing chemistries were placed around the femoral vein. A contrast agent was used to visualize vessel ingrowth into the scaffolds. Cell populations in the scaffold were mapped using immunohistochemistry. Calcium phosphate scaffolds induced 2.7–3 times greater volume of blood vessels than calcium sulphate or magnesium phosphate scaffolds. Macrophage and vSMC populations were identified that changed spatially and temporally within the scaffold during implantation. NLRP3 inflammasome activation peaked at weeks 2 and 4 and then declined; however, IL-1β expression was sustained over the course of the experiment. IL-8, a promoter of angiogenesis, was also detected, and together, these responses suggest a role of sterile inflammation. Unexpectedly, the effect was distinct from an injury response as a result of surgical placement and also was not simply a foreign body reaction as a result of placing a rigid bioceramic next to a vein, since, while the materials tested had similar microstructures, only the calcium phosphates tested elicited an angiogenic response. This finding then reveals a potential path towards a new strategy for creating better pro-regenerative biomaterials.
Was vor einigen Jahren undenkbar erschien, könnte zukünftig möglich sein: Krankes Gewebe mit Gesundem ersetzen, das in vitro mit modernsten Biofabrikationstechniken hergestellt wird. Dabei werden bisherige Grenzen überschritten: Während lichtbasierte Biodruckverfahren wie die Zwei-Photonen-Polymerisation Auflösungen bis in den Nanometerbereich erzielen, ermöglicht der Volumetrische Biodruck (VB) den Druck zentimetergroßer Konstrukte in wenigen Sekunden. Diese Geschwindigkeiten erweisen sich unter Biodruckverfahren als konkurrenzlos und werden erreicht, da das Bioharz nicht konsekutiv, sondern zugleich vernetzt wird. Einschränkend gilt bislang nur der Mangel an geeigneten Bioharzen für den VB. Daher beschäftigt sich vorliegende Arbeit mit der Charakterisierung und Modifikation eines dafür geeigneten Bioharzes: Gelatine-Methacrylat (GelMA). Dank seiner Zusammensetzung ähnelt das etablierte Hydrogelsystem der Extratrazellularmatrix: Der Gelatine-Anteil ermöglicht Biokompatibilität und Bioaktivität durch zelladhäsive sowie degradierbare Aminosäure-Sequenzen. Zugleich können durch photovernetzbare Methacryloyl-Substituenten Konstrukte mit einer Formstabilität bei 37 °C erzeugt werden.
Zunächst wurde das Bioharz zellbiologisch charakterisiert, indem mit der embryonalen Mausfibroblasten-Zelllinie NIH-3T3 beladene GelMA-Zylinder gegossen, photopolymerisiert und kultiviert wurden. Im Verlauf einer Woche wurde die Zytokompatibilität der Gele anhand der Proliferationsfähigkeit (PicoGreen-Assay), des Metabolismus (CCK-8-Assay) und der Vitalität (Live/Dead-Assay) der Zellen beurteilt. Dabei wurden Polymerkonzentrationen von 6 – 8 % sowie GelMA-Harze zweier verschiedener Molekulargewichte verglichen. Alle hergestellten Gele erwiesen sich als zytokompatibel, 6 % ige Gele ließen im Inneren jedoch zusätzlich eine beginnende Zellspreizung zu und ein niedriges GelMA-Molekulargewicht verstärkte die gemessene Proliferation. Die sich anschließende mechanische und physikalische Charakterisierung belegte, dass höher konzentrierte Gele einen größeren E-Modul aufwiesen und damit steifer waren. Eine Modifikation der Gele mit Fibronektin beeinflusste die Zellverträglichkeit weder positiv noch negativ und die Zugabe von Kollagen war wegen Entmischungseffekten nicht bewertbar. Es liegt die Vermutung nah, dass eine weitere Reduktion der Polymerkonzentration und damit Verringerung der Gelsteifigkeit der Schlüssel für mehr Zellspreizung und -wachstum ist. Da jedoch die Druckbarkeit des Bioharzes die weitere Senkung des GelMA-Gehalts limitiert, sollten zunächst Methoden entwickelt werden, welche die Netzwerkdichte des GelMAs anderweitig herabsetzen.
Within this thesis, three main approaches for the assessment and investigation of altered hemodynamics like wall shear stress, oscillatory shear index and the arterial pulse wave velocity in atherosclerosis development and progression were conducted:
1. The establishment of a fast method for the simultaneous assessment of 3D WSS and PWV in the complete murine aortic arch via high-resolution 4D-flow MRI
2. The utilization of serial in vivo measurements in atherosclerotic mouse models using high-resolution 4D-flow MRI, which were divided into studies describing altered hemodynamics in late and early atherosclerosis
3. The development of tissue-engineered artery models for the controllable application and variation of hemodynamic and biologic parameters, divided in native artery models and biofabricated artery models, aiming for the investigation of the relationship between atherogenesis and hemodynamics
Chapter 2 describes the establishment of a method for the simultaneous measurement of 3D WSS and PWV in the murine aortic arch at, using ultra high-field MRI at 17.6T [16], based on the previously published method for fast, self-navigated wall shear stress measurements in the murine aortic arch using radial 4D-phase contrast MRI at 17.6 T [4]. This work is based on the collective work of Dr. Patrick Winter, who developed the method and the author of this thesis, Kristina Andelovic, who performed the experiments and statistical analyses. As the method described in this chapter is basis for the following in vivo studies and undividable into the sub-parts of the contributors without losing important information, this chapter was not split into the single parts to provide fundamental information about the measurement and analysis methods and therefore better understandability for the following studies. The main challenge in this chapter was to overcome the issue of the need for a high spatial resolution to determine the velocity gradients at the vascular wall for the WSS quantification and a high temporal resolution for the assessment of the PWV without prolonging the acquisition time due to the need for two separate measurements. Moreover, for a full coverage of the hemodynamics in the murine aortic arch, a 3D measurement is needed, which was achieved by utilization of retrospective navigation and radial trajectories, enabling a highly flexible reconstruction framework to either reconstruct images at lower spatial resolution and higher frame rates for the acquisition of the PWV or higher spatial resolution and lower frame rates for the acquisition of the 3D WSS in a reasonable measurement time of only 35 minutes. This enabled the in vivo assessment of all relevant hemodynamic parameters related to atherosclerosis development and progression in one experimental session. This method was validated in healthy wild type and atherosclerotic Apoe-/- mice, indicating no differences in robustness between pathological and healthy mice.
The heterogeneous distribution of plaque development and arterial stiffening in atherosclerosis [10, 12], however, points out the importance of local PWV measurements. Therefore, future studies should focus on the 3D acquisition of the local PWV in the murine aortic arch based on the presented method, in order to enable spatially resolved correlations of local arterial stiffness with other hemodynamic parameters and plaque composition.
In Chapter 3, the previously established methods were used for the investigation of changing aortic hemodynamics during ageing and atherosclerosis in healthy wild type and atherosclerotic Apoe-/- mice using the previously established methods [4, 16] based on high-resolution 4D-flow MRI. In this work, serial measurements of healthy and atherosclerotic mice were conducted to track all changes in hemodynamics in the complete aortic arch over time. Moreover, spatially resolved 2D projection maps of WSS and OSI of the complete aortic arch were generated. This important feature allowed for the pixel-wise statistical analysis of inter- and intragroup hemodynamic changes over time and most importantly – at a glance. The study revealed converse differences of local hemodynamic profiles in healthy WT and atherosclerotic Apoe−/− mice, with decreasing longWSS and increasing OSI, while showing constant PWV in healthy mice and increasing longWSS and decreasing OSI, while showing increased PWV in diseased mice. Moreover, spatially resolved correlations between WSS, PWV, plaque and vessel wall characteristics were enabled, giving detailed insights into coherences between hemodynamics and plaque composition. Here, the circWSS was identified as a potential marker of plaque size and composition in advanced atherosclerosis. Moreover, correlations with PWV values identified the maximum radStrain could serve as a potential marker for vascular elasticity. This study demonstrated the feasibility and utility of high-resolution 4D flow MRI to spatially resolve, visualize and analyze statistical differences in all relevant hemodynamic parameters over time and between healthy and diseased mice, which could significantly improve our understanding of plaque progression towards vulnerability. In future studies the relation of vascular elasticity and radial strain should be further investigated and validated with local PWV measurements and CFD.
Moreover, the 2D histological datasets were not reflecting the 3D properties and regional characteristics of the atherosclerotic plaques. Therefore, future studies will include 3D plaque volume and composition analysis like morphological measurements with MRI or light-sheet microscopy to further improve the analysis of the relationship between hemodynamics and atherosclerosis.
Chapter 4 aimed at the description and investigation of hemodynamics in early stages of atherosclerosis. Moreover, this study included measurements of hemodynamics at baseline levels in healthy WT and atherosclerotic mouse models. Due to the lack of hemodynamic-related studies in Ldlr-/- mice, which are the most used mouse models in atherosclerosis research together with the Apoe-/- mouse model, this model was included in this study to describe changing hemodynamics in the aortic arch at baseline levels and during early atherosclerosis development and progression for the first time. In this study, distinct differences in aortic geometries of these mouse models at baseline levels were described for the first time, which result in significantly different flow- and WSS profiles in the Ldlr-/- mouse model. Further basal characterization of different parameters revealed only characteristic differences in lipid profiles, proving that the geometry is highly influencing the local WSS in these models. Most interestingly, calculation of the atherogenic index of plasma revealed a significantly higher risk in Ldlr-/- mice with ongoing atherosclerosis development, but significantly greater plaque areas in the aortic arch of Apoe-/- mice. Due to the given basal WSS and OSI profile in these two mouse models – two parameters highly influencing plaque development and progression – there is evidence that the regional plaque development differs between these mouse models during very early atherogenesis.
Therefore, future studies should focus on the spatiotemporal evaluation of plaque development and composition in the three defined aortic regions using morphological measurements with MRI or 3D histological analyses like LSFM. Moreover, this study offers an excellent basis for future studies incorporating CFD simulations, analyzing the different measured parameter combinations (e.g., aortic geometry of the Ldlr-/- mouse with the lipid profile of the Apoe-/- mouse), simulating the resulting plaque development and composition. This could help to understand the complex interplay between altered hemodynamics, serum lipids and atherosclerosis and significantly improve our basic understanding of key factors initiating atherosclerosis development.
Chapter 5 describes the establishment of a tissue-engineered artery model, which is based on native, decellularized porcine carotid artery scaffolds, cultured in a MRI-suitable bioreactor-system [23] for the investigation of hemodynamic-related atherosclerosis development in a controllable manner, using the previously established methods for WSS and PWV assessment [4, 16]. This in vitro artery model aimed for the reduction of animal experiments, while simultaneously offering a simplified, but completely controllable physical and biological environment. For this, a very fast and gentle decellularization protocol was established in a first step, which resulted in porcine carotid artery scaffolds showing complete acellularity while maintaining the extracellular matrix composition, overall ultrastructure and mechanical strength of native arteries. Moreover, a good cellular adhesion and proliferation was achieved, which was evaluated with isolated human blood outgrowth endothelial cells. Most importantly, an MRI-suitable artery chamber was designed for the simultaneous cultivation and assessment of high-resolution 4D hemodynamics in the described artery models. Using high-resolution 4D-flow MRI, the bioreactor system was proven to be suitable to quantify the volume flow, the two components of the WSS and the radStrain as well as the PWV in artery models, with obtained values being comparable to values found in literature for in vivo measurements. Moreover, the identification of first atherosclerotic processes like intimal thickening is achievable by three-dimensional assessment of the vessel wall morphology in the in vitro models. However, one limitation is the lack of a medial smooth muscle cell layer due to the dense ECM. Here, the utilization of the laser-cutting technology for the generation of holes and / or pits on a microscale, eventually enabling seeding of the media with SMCs showed promising results in a first try and should be further investigated in future studies. Therefore, the proposed artery model possesses all relevant components for the extension to an atherosclerosis model which may pave the way towards a significant improvement of our understanding of the key mechanisms in atherogenesis.
Chapter 6 describes the development of an easy-to-prepare, low cost and fully customizable artery model based on biomaterials. Here, thermoresponsive sacrificial scaffolds, processed with the technique of MEW were used for the creation of variable, biomimetic shapes to mimic the geometric properties of the aortic arch, consisting of both, bifurcations and curvatures. After embedding the sacrificial scaffold into a gelatin-hydrogel containing SMCs, it was crosslinked with bacterial transglutaminase before dissolution and flushing of the sacrificial scaffold. The hereby generated channel was subsequently seeded with ECs, resulting in an easy-to-prepare, fast and low-cost artery model. In contrast to the native artery model, this model is therefore more variable in size and shape and offers the possibility to include smooth muscle cells from the beginning. Moreover, a custom-built and highly adaptable perfusion chamber was designed specifically for the scaffold structure, which enabled a one-step creation and simultaneously offering the possibility for dynamic cultivation of the artery models, making it an excellent basis for the development of in vitro disease test systems for e.g., flow-related atherosclerosis research. Due to time constraints, the extension to an atherosclerosis model could not be achieved within the scope of this thesis. Therefore, future studies will focus on the development and validation of an in vitro atherosclerosis model based on the proposed bi- and three-layered artery models.
In conclusion, this thesis paved the way for a fast acquisition and detailed analyses of changing hemodynamics during atherosclerosis development and progression, including spatially resolved analyses of all relevant hemodynamic parameters over time and in between different groups. Moreover, to reduce animal experiments, while gaining control over various parameters influencing atherosclerosis development, promising artery models were established, which have the potential to serve as a new platform for basic atherosclerosis research.
Das Ziel der experimentellen Studie war die Erprobung der (bereits in vitro erfolgreich getesteten) Ca(OH)2-Beschichtung In vivo unter dem Aspekt, ob und inwieweit die antibakteriellen und somit auch antiinflammatorischen bzw. entzündungsmoderierenden Eigenschaften der Ca(OH)2-Beschichtung eine sinnvolle und effektive Ergänzung zu den bisher erfolgreich eingesetzten Calciumphosphat(CaP)-Beschichtungen mit bewiesenen, guten proosseointegrativen Eigenschaften bei lasttragenden Implantaten sein können.
Zusammenfassend kann festgestellt werden, dass die Ergebnisse der In vitro Untersuchung durch die In vivo Versuche in den Bereichen 0-100 KBE grundsätzlich als gestützt gelten können. Die Zuverlässigkeit der Wirkung durch Ca(OH)2 nimmt jedoch mit steigender KBE-Zahl ab, sodass weitere Testreihen sinnvoll sind.
Im Rahmen dieser Arbeit sollte herausgefunden werden, inwiefern Calciumorthophosphatzemente (CPC) dafür geeignet sind, um als Prüfkörper zur Qualifizierung von Knochenklebern zu dienen, und worin ihre Limitationen bestehen. Dazu sollte nicht nur ein materieller Vergleich verschiedener hydroxylapatitbildender Zemente mit Knochen erfolgen. Es sollte auch das Adhäsionsverhalten neuartiger Knochenkleber auf den verschiedenen Prüfkörpermaterialien verglichen werden, um mögliche Rückschlüsse für die Eignung als standardisierbares in-vitro Prüfkörpermaterial ziehen zu können.
Gegenstand der Untersuchung war ein α-Tricalciumphosphat (α-TCP)-System und ein Tetracalciumphosphat (TTCP)-System welche im Rahmen einer Zement-Abbindereaktion calciumdefizitären Hydroxylapatit (CDHA) bzw. stöchiometrischen Hydroxylapatit (HA) bilden. Die Materialien wurden dazu verwendet Prüfkörperteile in Form von Zylindern (5 x 5 mm) und Plättchen (20 x 10 x 5 mm) herzustellen, die dann mit verschiedenen Knochenklebern verklebt werden konnten. Der stärkste der verwendeten Kleber war ein Cyanoacrylat-Kleber (Truglue®). Er erzielte auf Prüfkörpern aus Knochen nach 24-stündiger Lagerung in PBS mittlere Abscherfestigkeiten von ca. 4,22 ± 1,92 MPa. Als zweitstärkster Kleber erwies sich ein neuartiger zementbasierter Kleber, der aus wärmebehandeltem Trimagnesiumphosphat-Hydrat und Phosphoserin bestand. Dieser Kleber erzielte unter den gleichen Umständen mittlere Abscherfestigkeiten von ca. 1,89 ± 0,29 MPa. Etwas schwächer schnitt ein ebenfalls neuartiger zementbasierter Kleber ab, der aus dem Magnesiumphosphat Farringtonit, sowie aus Magnesiumoxid und 25 % Phytinsäure bestand. Dieser Kleber erzielte mittlere Abscherfestigkeiten von ca. 0,51 ± 0,16 MPa. Insgesamt haben die Untersuchungen gezeigt, dass die in-vitro Qualifizierung von Knochenklebern unter Verwendung von Prüfkörpern aus Zement möglich wäre. Die Prüfkörper aus CDHA vereinten die meisten Vorteile und wären für Klebesysteme mit Abscherfestigkeiten von bis zu 2 MPa geeignet. Dabei erzeugten die Knochenkleber auf CDHA zwar abweichende Abscherfestigkeiten als auf Knochen, doch ließ sich ein vergleichbarer Trend bei stets reduzierten Varianzen erkennen. Durch die gute Konsistenz der Zementpaste war die Herstellung homogener Prüfkörper möglich. Aufgrund der Stabilität von CDHA unter wässrigen Bedingungen konnten Langzeitversuche ohne Einschränkungen vorgenommen werden. Die Limitationen der Prüfkörper aus CDHA bestanden allerdings darin, dass sie nicht für Abscherversuche von stärkeren Klebern geeignet waren. In solchen Fällen versagten die Prüfkörper noch bevor die maximale Abscherfestigkeit des jeweiligen Klebers gemessen werden konnte.
The human body has very good self-healing capabilities for numerous different injuries to a variety of different tissues. This includes the main human mechanical framework, the skeleton. The skeleton is limited in its healing without additional aid by medicine mostly by the defect size. When the defect reaches a size above 2.5 cm the regeneration of the defect ends up faulty. Here is where implants, defect fillers and other support approaches developed in medicine can help the body to heal the big defect still successfully.
Usually sturdy implants (auto-/allo-/xenogenic) are implanted in the defect to bridge the distance, but for auto- and allogenic implants a suitable donor site must be found and for all sources the implant needs to be shaped into the defect specific site to ensure a perfect fit, the best support and good healing. This shaping is very time consuming and prone to error, already in the planning phase. The use of a material that is moldable and sets in the desired shape shortly after applying negates these disadvantages. Cementitious materials offer exactly this property by being in a pasty stage after the powder and liquid components have been mixed and the subsequently hardening to a solid implant. These properties also enable the extrusion, and therefore may also enable the injection, of the cement via a syringe in a minimal invasive approach.
To enable a good injection of the cement modifications are necessary. This work aimed to modify commonly used calcium phosphate-based cement systems based on α-TCP (apatitic) and β-TCP (brushitic). These have been modified with sodium phytate and phytic acid, respectively. Additionally, the α-TCP system has been modified with sodium pyrophosphate, in a second study, to create a storable aqueous paste that can be activated once needed with a highly concentrated sodium orthophosphate solution.
The powder phase of the α-TCP cement system consisted of nine parts α-TCP and one part CDHA. These were prepared to have different particle sizes and therefore enable a better powder flowability through the bimodal size distribution. α-TCP had a main particle size of 20 μm and CDHA of 2.6 μm. The modification with sodium phytate led to an adsorption of phytate ions on the surface of the α-TCP particles, where they started to form complexes with the Ca2+ ions in the solution. This adsorption had two effects. The first was to make the calcium ions unavailable, preventing supersaturation and ultimately the precipitation of CDHA what would lead to the cement hardening. The second was the increase of the absolute value of the surface charge, zeta potential, of the powder in the cement paste. Here a decrease from +3 mV to -40 mV could be measured. A strong value for the zeta potential leads to a higher repulsion of similarly charged particles and therefore prevents powder agglomeration and clogging on the nozzle during injection. These two modifications (bimodal particles size distribution and phytic acid) lead to a significant increase in the paste injectability. The unmodified paste was injectable for 30 % only, where all modified pastes were practically fully injectable ~90 % (the residual paste remained in the nozzle, while the syringe plunger already reached the end of the syringe).
A very similar observation could be made for the β-TCP system. This system was modified with phytic acid. The zeta potential was decreased even stronger from -10 ± 1.5 mV to -71.5 ± 12 mV. The adsorption of the phytate ions and subsequent formation of chelate complexes with the newly dissolved Ca2+ ions also showed a retarding effect in the cements setting reaction. Where the unmodified cement was not measurable in the rheometer, as the reaction was faster than the measurement setup (~1.5 min), the modified cements showed a transition through the gel point between 3-6 min. This means the pastes stayed between 2 and 4 times longer viscous than without the modification. Like with the first cement system also here the effects of the phytate addition showed its beneficial influence in the injectability measurement. The unmodified cement was not injectable at all, due to the same issue already encountered at the rheology measurements, but all modified pastes were fully injectable for at least 5 min (lowest phytate concentration) and at least 10 min (all other concentrations) after the mixing of powder and liquid.
The main goal of the last modification with sodium pyrophosphate was to create a paste that was stable in aqueous environment without setting until the activation takes place, but it should still show good injectability as this was the desired way of application after activation. Like before also the zeta potential changed after the addition of pyrophosphate. It could be lowered from -22 ± 2mV down to -61 to -68 ± 4mV (depending on the pyrophosphate concentration). The pastes were stored in airtight containers at room temperature and checked for their phase composition over 14 days. The unmodified paste showed a beginning phase conversion to hydroxyapatite between 7 and 14 days. All other pastes were still stable and unreacted. The pastes were activated with a high concentrated (30 wt%) sodium orthophosphate solution. After the activation the pastes were checked for their injectability and showed an increase from -57 ± 11% for the unmodified paste to -89 ± 3% (practically fully injectable as described earlier) for the best modified paste (PP005).
It can be concluded that the goal of enabling full injection of conventional calcium phosphate bone cement systems was reached. Additional work produced a storage stable paste that still ensures full injectability. Subsequent work already used the storable paste and modified it with hyaluronic acid to create an ink for 3D extrusion printing. The first two cement systems have also already been investigated in cell culture for their influence on osteoblasts and osteoclasts. The next steps would have to go more into the direction of translation. Figuring out what properties still need to be checked and where the modification needs adjustment to enable a clinical use of the presented systems.
Heutige chirurgische Situationen können zeitweise den Einsatz eines Knochenkleber erfordern, welcher sich jedoch noch nicht in der klinischen Praxis etablieren konnte. In jüngster Vergangenheit haben mit Phosphoserin modifizierte Zemente (PMC) auf der Grundlage von Verbindungen zwischen o-Phosphoserin (OPLS) und Calciumphosphaten wie Tetracalciumphosphat (TTCP) oder α-Tricalciumphosphat (α-TCP) an Popularität gewonnen. Ebenso bekommen chelatbildende Magnesiumphosphatzemente als mineralische Knochenadhäsive mehr Zuspruch. In dieser Arbeit wurden neue mineralorganische Knochenzemente auf der Basis von Phosphoserin und Magnesiumphosphaten oder -oxiden untersucht, die hervorragende Hafteigenschaften besitzen. Diese wurden mittels Röntgenbeugung, Fourier-Infrarot-Spektroskopie und Elektronenmikroskopie analysiert und mechanischen Tests unterzogen, um die Haftfestigkeit am Knochen nach Alterung unter physiologischen Bedingungen zu bestimmen. Die neuartigen biomineralischen Klebstoffe zeigen eine ausgezeichnete Haftfestigkeit an Knochen mit etwa 6,6-7,3 MPa unter Scherbelastung. Die Adhäsive sind auch aufgrund ihres kohäsiven Versagensmusters und ihres duktilen Charakters vielversprechend. In diesem Zusammenhang sind die neuen adhäsiven Zemente den derzeit vorherrschenden Knochenadhäsiven überlegen. Ergänzend wurde versucht, dieses neue System mit unterschiedlichen Additiven zu modifizieren. Dabei wurde Mannit erfolgreich als Porogen verwendet. Dreiarmiges sternförmiges NCO-sP(EO-stat-PO) sollte die adhäsiven Eigenschaften und das Leistungspotenzial unter Wasser verbessern. Zuletzt wurden mit Glycerol präfabrizierte Pasten hergestellt, welche gelagert werden können und bei Kontakt mit Wasser aushärten. Generell ist zu betonen, dass künftige Bemühungen um Knochenklebstoffe aus Phosphoserin und Mg2+ sehr lohnenswert erscheinen.
Zelluläre Resorption 3D-gedruckter Knochenimplantate auf Basis von Calciummagnesiumphosphaten
(2023)
Für die Behandlung von Knochendefekten kritischer Größe gibt es heute eine Reihe von Therapiemöglichkeiten. Neuartige Ansätze mit Magnesiumphosphat- (MPC) und Calciummagnesiumphosphatzementen (CMPC) haben sich als echte Alternativen zu den etablierten Calciumphosphaten erwiesen.
Ziel war es, die Osteoklastogenese in vitro auf 3D-pulvergedrucktem CMPC und MPC zu induzieren und die zelluläre Resorption (zR) zu analysieren. Polystyrol (PS), Glas, β-TCP und Brushit-bildender Zement dienten als Referenzen.
Als Proben wurden Zemente der allgemeinen stöchiometrischen Summenformel CaxMg(3–x)(PO4)2 (x = 0; 0,25; 0,75; 3) verwendet, die Struvit oder Newberyit enthielten. Für die Osteoklastogenese wurden monozytenangereicherte PBMCs aus Buffy-Coat mittels dreifacher Dichtegradientenzentrifugation isoliert, auf die Prüfoberflächen ausgesät und über einen Zeitraum von 22 Tagen mit Zytokinen (M-CSF und RANKL) stimuliert. Die Interaktion der Zellen mit den Zementen bzw. PS/Glas wurde mittels TRAP-Färbung und -Aktivität, DNA- und Ionenkonzentrationen (Ca2+, Mg2+, PO43–, pH-Wert), Rasterelektronen-, Durchlicht-, Auflicht- und Fluoreszenzmikroskopie analysiert.
Auf den Struvit- und Newberyit-bildenden Zementen konnten keine für Osteoklasten typischen Riesenzellen nachgewiesen werden. Auf den Struvit-bildenden Zementen wurde deutlich mehr mononukleäre Zellen nachgewiesen wurden als auf den Newberyit-bildenden Zementen. Während die Freisetzung von Mg2+ und PO43– ausschließlich durch die chemische Degradation erfolgte, wurde Ca2+ zunächst adsorbiert und anschließend durch zR freigesetzt. Die erhöhte Ca2+-Adsorption im Vergleich zur Ca2+-Resorption führte insgesamt zu einer Calcium-Präzipitation.
Da lediglich auf β-TCP Resorptionslakunen beobachtet wurden, wird angenommen, dass auf den CMPC, MPC und Brushite-bildenden Zementen die zellvermittelte Ca2+-Freisetzung von den Präzipitaten ausging, die von Makrophagen auf den Zementen und/oder Riesenzellen auf den Wellplatten resorbiert wurden.
3D neuronal cultures attempt to better replicate the in vivo environment to study neurological/neurodegenerative diseases compared to 2D models. A challenge to establish 3D neuron culture models is the low elastic modulus (30–500 Pa) of the native brain. Here, an ultra-soft matrix based on thiolated hyaluronic acid (HA-SH) reinforced with a microfiber frame is formulated and used. Hyaluronic acid represents an essential component of the brain extracellular matrix (ECM). Box-shaped frames with a microfiber spacing of 200 µm composed of 10-layers of poly(ɛ-caprolactone) (PCL) microfibers (9.7 ± 0.2 µm) made via melt electrowriting (MEW) are used to reinforce the HA-SH matrix which has an elastic modulus of 95 Pa. The neuronal viability is low in pure HA-SH matrix, however, when astrocytes are pre-seeded below this reinforced construct, they significantly support neuronal survival, network formation quantified by neurite length, and neuronal firing shown by Ca\(^{2+}\) imaging. The astrocyte-seeded HA-SH matrix is able to match the neuronal viability to the level of Matrigel, a gold standard matrix for neuronal culture for over two decades. Thus, this 3D MEW frame reinforced HA-SH composite with neurons and astrocytes constitutes a reliable and reproducible system to further study brain diseases.
Polymeric Janus Fibers
(2023)
Janus fibers are a class of composite materials comprising mechanical and chemical to biological functionality. Combining different materials and functionalities in one micro- or even nanoscale fiber enables otherwise unreachable synergistic physicochemical effects with unprecedented opportunities for technical or biomedical applications. Here, recent developments of processing technologies and applications of polymeric Janus fibers will be reviewed. Various examples in the fields of textiles, catalysis, sensors as well as medical applications, like drug delivery systems, tissue engineering and antimicrobial materials, are presented to illuminate the outstanding potential of such high-end functional materials for novel applications in the upcoming future.
Melt electrowriting, a high-resolution additive manufacturing technique, is used in this study to process a magnetic polymer-based blend for the first time. Carbonyl iron (CI) particles homogenously distribute into poly(vinylidene fluoride) (PVDF) melts to result in well-defined, highly porous structures or scaffolds comprised of fibers ranging from 30 to 50 µm in diameter. This study observes that CI particle incorporation is possible up to 30 wt% without nozzle clogging, albeit that the highest concentration results in heterogeneous fiber morphologies. In contrast, the direct writing of homogeneous PVDF fibers with up to 15 wt% CI is possible. The fibers can be readily displaced using magnets at concentrations of 1 wt% and above. Combined with good viability of L929 CC1 cells using Live/Dead imaging on scaffolds for all CI concentrations indicates that these formulations have potential for the usage in stimuli-responsive applications such as 4D printing.
A facile and flexible approach for the integration of biomimetically branched microvasculature within bulk hydrogels is presented. For this, sacrificial scaffolds of thermoresponsive poly(2-cyclopropyl-2-oxazoline) (PcycloPrOx) are created using melt electrowriting (MEW) in an optimized and predictable way and subsequently placed into a customized bioreactor system, which is then filled with a hydrogel precursor solution. The aqueous environment above the lower critical solution temperature (LCST) of PcycloPrOx at 25 °C swells the polymer without dissolving it, resulting in fusion of filaments that are deposited onto each other (print-and-fuse approach). Accordingly, an adequate printing pathway design results in generating physiological-like branchings and channel volumes that approximate Murray's law in the geometrical ratio between parent and daughter vessels. After gel formation, a temperature decrease below the LCST produces interconnected microchannels with distinct inlet and outlet regions. Initial placement of the sacrificial scaffolds in the bioreactors in a pre-defined manner directly yields perfusable structures via leakage-free fluid connections in a reproducible one-step procedure. Using this approach, rapid formation of a tight and biologically functional endothelial layer, as assessed not only through fluorescent dye diffusion, but also by tumor necrosis factor alpha (TNF-α) stimulation, is obtained within three days.
In recent decades, hybrid characterization systems have become pillars in the study of cellular biomechanics. Especially, Atomic Force Microscopy (AFM) is combined with a variety of optical microscopy techniques to discover new aspects of cell adhesion. AFM, however, is limited to the early-stage of cell adhesion, so that the forces of mature cell contacts cannot be addressed. Even though the invention of Fluidic Force Microscopy (FluidFM) overcomes these limitations by combining the precise force-control of AFM with microfluidics, the correlative investigation of detachment forces arising from spread mammalian cells has been barely achieved. Here, a novel multifunctional device integrating Fluorescence Microscopy (FL) into FluidFM technology (FL-FluidFM) is introduced, enabling real-time optical tracking of entire cell detachment processes in parallel to the undisturbed acquisition of force-distance curves. This setup, thus, allows for entailing two pieces of information at once. As proof-of-principle experiment, this method is applied to fluorescently labeled rat embryonic fibroblast (REF52) cells, demonstrating a precise matching between identified force-jumps and visualized cellular unbinding steps. This study, thus, presents a novel characterization tool for the correlated evaluation of mature cell adhesion, which has great relevance, for instance, in the development of biomaterials or the fight against diseases such as cancer.
Melt electrowriting (MEW) is an additive manufacturing process that produces highly defined constructs with elements in the micrometer range. A specific configuration of MEW enables printing tubular constructs to create small-diameter tubular structures. The small pool of processable materials poses a bottleneck for wider application in biomedicine. To alleviate this obstacle, an acrylate-endcapped urethane-based polymer (AUP), using a poly(ε-caprolactone) (PCL) (molar mass: 20 000 g mol\(^{−1}\)) (AUP PCL20k) as backbone material, is synthesized and utilized for MEW. Spectroscopic analysis confirms the successful modification of the PCL backbone with photo-crosslinkable acrylate endgroups. Printing experiments of AUP PCL20k reveal limited printability but the photo-crosslinking ability is preserved post-printing. To improve printability and to tune the mechanical properties of printed constructs, the AUP-material is blended with commercially available PCL (AUP PCL20k:PCL in ratios 80:20, 60:40, 50:50). Print fidelity improves for 60:40 and 50:50 blends. Blending enables modification of the constructs' mechanical properties to approximate the range of blood vessels for transplantation surgeries. The crosslinking-ability of the material allows pure AUP to be manipulated post-printing and illustrates significant differences in mechanical properties of 80:20 blends after crosslinking. An in vitro cell compatibility assay using human umbilical vein endothelial cells also demonstrates the material's non-cytotoxicity.
Polymers sensitive to thermal degradation include poly(lactic-co-glycolic acid) (PLGA), which is not yet processed via melt electrowriting (MEW). After an initial period of instability where mean fiber diameters increase from 20.56 to 27.37 µm in 3.5 h, processing stabilizes through to 24 h. The jet speed, determined using critical translation speed measurements, also reduces slightly in this 3.5 h period from 500 to 433 mm min\(^{−1}\) but generally remains constant. Acetyl triethyl citrate (ATEC) as an additive decreases the glass transition temperature of PLGA from 49 to 4 °C, and the printed ATEC/PLGA fibers exhibits elastomeric behavior upon handling. Fiber bundles tested in cyclic mechanical testing display increased elasticity with increasing ATEC concentration. The processing temperature of PLGA also reduces from 165 to 143 °C with increase in ATEC concentration. This initial window of unstable direct writing seen with neat PLGA can also be impacted through the addition of 10-wt% ATEC, producing fiber diameters of 14.13 ± 1.69 µm for the first 3.5 h of heating. The investigation shows that the initial changes to the PLGA direct-writing outcomes seen in the first 3.5 h are temporary and that longer times result in a more stable MEW process.
Previous research on the melt electrowriting (MEW) of poly(vinylidene difluoride) (PVDF) resulted in electroactive fibers, however, printing more than five layers is challenging. Here, we investigate the influence of a heated collector to adjust the solidification rate of the PVDF jet so that it adheres sufficiently to each layer. A collector temperature of 110°C is required to improve fiber processing, resulting in a total of 20 fiber layers. For higher temperatures and higher layers, an interesting phenomenon occurred, where the intersection points of the fibers coalesced into periodic spheres of diameter 206 ± 52 μm (26G, 150°C collector temperature, 2000 mm/min, 10 layers in x- and y-direction).The heated collector is an important component of a MEW printer that allows polymers with a high melting point to be processable with increased layers.
Mucin, a high molecular mass hydrophilic glycoprotein, is the main component of mucus that coats every wet epithelium in animals. It is thus intrinsically biocompatible, and with its protein backbone and the o-glycosidic bound oligosaccharides, it contains a plethora of functional groups which can be used for further chemical modifications. Here, chain-growth and step-growth (thiol-ene) free-radical cross-linked hydrogels prepared from commercially available pig gastric mucin (PGM) are introduced and compared as cost-efficient and easily accessible alternative to the more broadly applied bovine submaxillary gland mucin. For this, PGM is functionalized with photoreactive acrylate groups or allyl ether moieties, respectively. Whereas homopolymerization of acrylate-functionalized polymers is performed, for thiol-ene cross-linking, the allyl-ether-functionalized PGM is cross-linked with thiol-functionalized hyaluronic acid. Morphology, mechanical properties, and cell compatibility of both kinds of PGM hydrogels are characterized and compared. Furthermore, the biocompatibility of these hydrogels can be evaluated in cell culture experiments.
In kürzlich erschienenen Studien hat sich die Zementformulierung Baghdadit (Ca3ZrSi2O9) durch Eigenschaften wie eine hydraulische Aktivität, Röntgenopazität und bioaktive Wirkung als potenzielles Material für die endodontische Anwendung qualifiziert. Ziel dieser Studie war es, Baghdadit als einphasigen Biozement und in Form verschiedener Materialzusammensetzungen auf vorteilhafte Eigenschaften im Hinblick auf die Anwendung als endodontischen Funktionswerkstoff zu untersuchen. Nach eigenständiger Herstellung des mechanisch aktivierten Zementpulvers Ca3ZrSi2O9, erfolgte die Charakterisierung der verschiedenen Zementformulierungen maBag, Bag100Bru und Bag50Bru hinsichtlich der Injizierbarkeit, des pH-Verlaufs während der Abbindung, der Druckfestigkeit und Phasenzusammensetzung mittels XRD. Daneben wurde Baghdadit zu je drei verschiedenen Gewichtsanteilen als Füllstoff in eine Methacrylat-basierte Matrix integriert und hinsichtlich der Fließfähigkeit entsprechend der Norm DIN EN ISO 6876:2012, des qualitativen Polymerisationsgrads und der Druckfestigkeit geprüft. Mit einer Auswahl der oben genannten Materialien erfolgte die Untersuchung der antibakteriellen Wirksamkeit, der Röntgensichtbarkeit orientierend an der Norm DIN EN ISO 13116:2014 und der Dichtigkeit im Wurzelkanal.
Mineral biocements are brittle materials, which usually results in catastrophic failure during mechanical loading. Here, previous works demonstrated the feasibility of reducing brittleness by a dual-setting approach, in which a silica sol was simultaneously gelled during the setting of a brushite forming cement. The current thesis aimed at further improving this concept by both using a novel silicate based cement matrix for an enhanced bonding between cement and silica matrix as well as multifunctional silica precursors to increase the network density of the gel. Due to its well-known biocompatibility and osteogenic regeneration capacity, baghdadite was chosen as mineral component of such composites. This required in a first approach the conversion of baghdadite ceramics into self-setting cement formulations. This was investigated initially by using baghdadite as reactive filler in a brushite forming cement (Chapter 4). Here, the ß-TCP component in a equimolar mixture of ß-TCP and acidic monocalcium phosphate anhydrous was subsequently replaced by baghdadite at various concentrations (0, 5, 10, 20, 30, 50, and 100 wt%) to study the influence on physicochemical cement properties such as mechanical performance, radiopacity, phase composition and microstructure. X-ray diffraction profiles demonstrated the dissolution of baghdadite during the cement reaction without affecting the crystal structure of the precipitated brushite phase. In addition, EDX analysis showed that calcium is homogeneously distributed in the cement matrix, while zirconium and silicon form cluster-like aggregates ranging in size from a few micrometers to more than 50 µm. X-ray images and µ-CT analyses indicate improved X-ray visibility with increased incorporation of baghdadite in brushite cement, with an aluminum equivalent thickness nearly doubling at a baghdadite content of 50 wt%. At the same time, the compressive strength of brushite cement increased from 12.9 ± 3.1 MPa to 21.1 ± 4.1 MPa at a baghdadite content of 10 wt%. Cell culture medium conditioned with powdered brushite cement approached physiological pH values when increasing amounts of baghdadite were added to the cement (pH = 6.47 for pure brushite, pH = 7.02 for brushite with 20 wt% baghdadite substitution). Baghdadite substitution also affected the ion content in the culture medium and thus the proliferation activity of primary human osteoblasts in vitro. The results demonstrated for the first time the suitability of baghdadite as a reactive cement additive for improving the radiopacity, mechanical performance, and cytocompatibility of brushite cements.
A second approach (Chapter 5) aimed to produce single component baghdadite cements by an increase of baghdadite solubility to initiate a self-setting cement reaction. For this, the material was mechanically activated by longer grinding times of up to 24h leading to both a decrease in particle and crystallite size as well as a partial amorphization of baghdadite. Baghdadite cements were formed by adding water at a powder to liquid ratio of 2.0 g/ml. Maximum compressive strengths were determined to be ~2 MPa after 3 days of setting for a 24-hour ground material. Inductively coupled plasma mass spectrometry (ICP-MS) measurements showed an incongruent dissolution profile of the set cements, with preferential dissolution of calcium and only minor release of zirconium ions. Cement formation occurs under alkaline conditions, with the unground raw powder resulting in a pH of 11.9 during setting, while prolonged grinding increases the pH to about 12.3.
Finally, mechanically activated baghdadite cements were combined with inorganic silica networks (Chapter 6) to create dual-setting cements with a further improvement of mechanical performance. While a modification of the cement pastes with a TEOS derived sol was already thought to improve strength, it was hypothesized that using multi-arm silica precursors can further enhance their mechanical performance due to a higher network density. In addition, this should also reduce pore size of both gels and cement and hence will be able to adjust the release kinetics of incorporated drugs. For this, multi-armed silica precursors were synthesized by the reaction of various multivalent alcohols (ethylene glycol, glycerine, pentaerythrit) with an isocyanate modified silica precursor. After hydrolysis under acidic conditions, the sols were mixed with baghdadite cement powders in order to allow a simultaneous gel formation and cement setting. Since the silica monomers have a high degree of linkage sites, this resulted in a branched network that interpenetrated with the growing cement crystals. In addition to minor changes in the crystalline phase composition as determined by X-ray diffraction, the novel composites exhibited improved mechanical properties with up to 20 times higher compressive strength and further benefit from an about 50% lower overall porosity than the reference pure baghdadite cement. In addition, the initial burst release of the model drug vancomycin was completely inhibited by the added silica matrix. This observation was verified by testing for the antimicrobial activity with Staphylococcus aureus by measuring the inhibition zones of selected samples after 24 h and 48 h, whereas the antimicrobial effectiveness of a constant vancomycin release could be demonstrated.
The current thesis clearly demonstrated the high potential of baghdadite as a cement formulation for medical application. The initially poor mechanical properties of such cements can be overcome by special processing techniques or by combination with silica networks. The achieved mechanical performance is > 10 MPa and hence suitable for bone replacement under non-load bearing conditions. The high intrinsic radiopacity as well as the alkaline pH during setting may open the way ahead to further dental applications, e.g. as root canal sealers or filler in dental composites. Here, the high pH is thought to lead to antimicrobial properties of such materials similar to commonly applied calcium hydroxide or calcium silicates, however combined with an intrinsic radiopacity for X-ray imaging. This would simplify such formulations to single component materials which are less susceptible to demixing processes during transport, storage or processing.
Despite advances in cartilage repair strategies, treatment of focal chondral lesions remains an important challenge to prevent osteoarthritis. Articular cartilage is organized into several layers and lack of zonal organization of current grafts is held responsible for insufficient biomechanical and biochemical quality of repair-tissue. The aim was to develop a zonal approach for cartilage regeneration to determine whether the outcome can be improved compared to a non-zonal strategy. Hydrogel-filled polycaprolactone (PCL)-constructs with a chondrocyte-seeded upper-layer deemed to induce hyaline cartilage and a mesenchymal stromal cell (MSC)-containing bottom-layer deemed to induce calcified cartilage were compared to chondrocyte-based non-zonal grafts in a minipig model. Grafts showed comparable hardness at implantation and did not cause visible signs of inflammation. After 6 months, X-ray microtomography (µCT)-analysis revealed significant bone-loss in both treatment groups compared to empty controls. PCL-enforcement and some hydrogel-remnants were retained in all defects, but most implants were pressed into the subchondral bone. Despite important heterogeneities, both treatments reached a significantly lower modified O’Driscoll-score compared to empty controls. Thus, PCL may have induced bone-erosion during joint loading and misplacement of grafts in vivo precluding adequate permanent orientation of zones compared to surrounding native cartilage.
Animal models are important tools to investigate the pathogenesis and develop treatment strategies for breast cancer in humans. In this study, we developed a new three-dimensional in vivo arteriovenous loop model of human breast cancer with the aid of biodegradable materials, including fibrin, alginate, and polycaprolactone. We examined the in vivo effects of various matrices on the growth of breast cancer cells by imaging and immunohistochemistry evaluation. Our findings clearly demonstrate that vascularized breast cancer microtissues could be engineered and recapitulate the in vivo situation and tumor-stromal interaction within an isolated environment in an in vivo organism. Alginate–fibrin hybrid matrices were considered as a highly powerful material for breast tumor engineering based on its stability and biocompatibility. We propose that the novel tumor model may not only serve as an invaluable platform for analyzing and understanding the molecular mechanisms and pattern of oncologic diseases, but also be tailored for individual therapy via transplantation of breast cancer patient-derived tumors.
A novel approach, in the context of bioprinting, is the targeted printing of a defined number of cells at desired positions in predefined locations, which thereby opens up new perspectives for life science engineering. One major challenge in this application is to realize the targeted printing of cells onto a gel substrate with high cell survival rates in advanced bioinks. For this purpose, different alginate-dialdehyde—polyethylene glycol (ADA-PEG) inks with different PEG modifications and chain lengths (1–8 kDa) were characterized to evaluate their application as bioinks for drop on demand (DoD) printing. The biochemical properties of the inks, printing process, NIH/3T3 fibroblast cell distribution within a droplet and shear forces during printing were analyzed. Finally, different hydrogels were evaluated as a printing substrate. By analysing different PEG chain lengths with covalently crosslinked and non-crosslinked ADA-PEG inks, it was shown that the influence of Schiff's bases on the viscosity of the corresponding materials is very low. Furthermore, it was shown that longer polymer chains resulted in less stable hydrogels, leading to fast degradation rates. Several bioinks highly exhibit biocompatibility, while the calculated nozzle shear stress increased from approx. 1.3 and 2.3 kPa. Moreover, we determined the number of cells for printed droplets depending on the initial cell concentration, which is crucially needed for targeted cell printing approaches.
Background: Glioblastoma multiforme (GBM) and metastatic triple-negative breast cancer (TNBC) with PTEN mutations often lead to brain dissemination with poor patient outcome, thus new therapeutic targets are needed. To understand signaling, controlling the dynamics and mechanics of brain tumor cell migration, we implemented GBM and TNBC cell lines and designed 3D aligned microfibers and scaffolds mimicking brain structures. Methods: 3D microfibers and scaffolds were printed using melt electrowriting. GBM and TNBC cell lines with opposing PTEN genotypes were analyzed with RHO-ROCK-PTEN inhibitors and PTEN rescue using live-cell imaging. RNA-sequencing and qPCR of tumor cells in 3D with microfibers were performed, while scanning electron microscopy and confocal microscopy addressed cell morphology. Results: In contrast to the PTEN wildtype, GBM and TNBC cells with PTEN loss of function yielded enhanced durotaxis, topotaxis, adhesion, amoeboid migration on 3D microfibers and significant high RHOB expression. Functional studies concerning RHOB-ROCK-PTEN signaling confirmed the essential role for the above cellular processes. Conclusions: This study demonstrates a significant role of the PTEN genotype and RHOB expression for durotaxis, adhesion and migration dependent on 3D. GBM and TNBC cells with PTEN loss of function have an affinity for stiff brain structures promoting metastasis. 3D microfibers represent an important tool to model brain metastasizing tumor cells, where RHO-inhibitors could play an essential role for improved therapy.
As one kind of “smart” material, thermogelling polymers find applications in biofabrication, drug delivery and regenerative medicine. In this work, we report a thermosensitive poly(2-oxazoline)/poly(2-oxazine) based diblock copolymer comprising thermosensitive/moderately hydrophobic poly(2-N-propyl-2-oxazine) (pPrOzi) and thermosensitive/moderately hydrophilic poly(2-ethyl-2-oxazoline) (pEtOx). Hydrogels were only formed when block length exceeded certain length (≈100 repeat units). The tube inversion and rheological tests showed that the material has then a reversible sol-gel transition above 25 wt.% concentration. Rheological tests further revealed a gel strength around 3 kPa, high shear thinning property and rapid shear recovery after stress, which are highly desirable properties for extrusion based three-dimensional (3D) (bio) printing. Attributed to the rheology profile, well resolved printability and high stackability (with added laponite) was also possible. (Cryo) scanning electron microscopy exhibited a highly porous, interconnected, 3D network. The sol-state at lower temperatures (in ice bath) facilitated the homogeneous distribution of (fluorescently labelled) human adipose derived stem cells (hADSCs) in the hydrogel matrix. Post-printing live/dead assays revealed that the hADSCs encapsulated within the hydrogel remained viable (≈97%). This thermoreversible and (bio) printable hydrogel demonstrated promising properties for use in tissue engineering applications.
Bioprinting offers the opportunity to fabricate precise 3D tumor models to study tumor pathophysiology and progression. However, the choice of the bioink used is important. In this study, cell behavior was studied in three mechanically and biologically different hydrogels (alginate, alginate dialdehyde crosslinked with gelatin (ADA–GEL), and thiol-modified hyaluronan (HA-SH crosslinked with PEGDA)) with cells from breast cancer (MDA-MB-231 and MCF-7) and melanoma (Mel Im and MV3), by analyzing survival, growth, and the amount of metabolically active, living cells via WST-8 labeling. Material characteristics were analyzed by dynamic mechanical analysis. Cell lines revealed significantly increased cell numbers in low-percentage alginate and HA-SH from day 1 to 14, while only Mel Im also revealed an increase in ADA–GEL. MCF-7 showed a preference for 1% alginate. Melanoma cells tended to proliferate better in ADA–GEL and HA-SH than mammary carcinoma cells. In 1% alginate, breast cancer cells showed equally good proliferation compared to melanoma cell lines. A smaller area was colonized in high-percentage alginate-based hydrogels. Moreover, 3% alginate was the stiffest material, and 2.5% ADA–GEL was the softest material. The other hydrogels were in the same range in between. Therefore, cellular responses were not only stiffness-dependent. With 1% alginate and HA-SH, we identified matrices that enable proliferation of all tested tumor cell lines while maintaining expected tumor heterogeneity. By adapting hydrogels, differences could be accentuated. This opens up the possibility of understanding and analyzing tumor heterogeneity by biofabrication.
Der steigende Bedarf an Knochenersatzmaterialien (KEM) in Medizin und Zahnmedizin verdeutlicht die Notwendigkeit der Etablierung weiterer alloplastischer, also synthetisch hergestellter, KEMs. Additive Fertigung ermöglicht die Herstellung patientenspezifischer Implantate. Hierfür wird auf Basis von 3D Bildgebung eines Knochendefekts, ein Implantat mittels CAD geplant und anschließend mittels additiver Fertigung, zum Beispiel durch 3D Pulverdruck hergestellt.
Ziel dieser Arbeit war die Untersuchung des osteogenen Potentials in vitro von Calciummagnesiumphosphatkeramiken mit der allgemeinen Strukturformel CaxMg(3-x)(PO4)2 mit x = 0; 0,25; 0,75; 1,5; 3 aus additiver Fertigung. Hierfür wurden Prüfkörper mittels 3D Pulverdruck gedruckt, anschließend durch Hochtemperatursinterung verfestigt und durch Behandlung mit reaktiven Lösungen nachgehärtet. Abhängig von der reaktiven Lösung wandelte sich die Keramik teilweise in Struvit, Bruschit und Newberyit um. Die biologische Testung in vitro erfolgte mit hFOB 1.19 Zellen und ergab eine gute Biokompatibilität sowie die Ausdifferenzierung osteogener Progenitorzellen für fast alle Keramikphasen, wobei die newberyithaltigen Keramiken tendenziell bessere Ergebnisse erzielten.
This thesis identifies how the printing conditions for a high-resolution additive manufacturing technique, melt electrowriting (MEW), needs to be adjusted to process electroactive polymers (EAPs) into microfibers. Using EAPs based on poly(vinylidene difluoride) (PVDF), their ability to be MEW-processed is studied and expands the list of processable materials for this technology.
The focus of this thesis was to investigate how PCL and PLGA react to the heat exposure that comes with the MEW process over a defined timespan.
To assess the thermal stability of PCL during MEW over 25 d, an automated collection of fibers has been used to determine the CTS on each day of heating for three different temperatures. PCL is exceptionally stable over 25 d at 75 °C, whereas for 85 °C and 95 °C a slight upward trend during the last 10 d could be observed, which is an indication for thermal degradation. Same trend could be observed for diameter of fibers produced at a fixed collector speed. For all temperatures, CTS during the first 5 d decreased due to inhomogeneities of the melt. Physical analysis of the fibers by XRD and mechanical testing showed no significant changes.
To investigate the chemical details of the thermal durability, PCL was artificially aged over 25 d at 75 °C, 85 °C and 95 °C. Data from GPC analysis and rheology revealed that PCL is degrading steadily at all three temperatures. Combined with GC-MS analysis, two different mechanisms for degradation could be observed: random chain scission and unzipping. Additional GPC experiment using a mixture of PCL and a fluorescence labelled PCL showed that PCL was undergoing ester interchange reactions, which could explain its thermal stability.
PLGA was established successfully as material for MEW. GPC results revealed that PLGA degraded heavily in the one-hour preheating period. To reduce the processing temperature, ATEC was blended with PLGA in three mixtures. This slowed down degradation and a processing window of 6 h could be established. Mechanical testing with fibers produced with PLGA and all three blends was performed. PLGA was very brittle, whereas the blends showed an elastic behavior. This could be explained by ester interchange reactions that formed a loosely crosslinked network with ATEC.
Dual setting cements composed of an in situ forming hydrogel and a reactive mineral phase combine high compressive strength of the cement with sufficient ductility and bending strength of the polymeric network. Previous studies were focused on the modification with non-degradable hydrogels based on 2-hydroxyethyl methacrylate (HEMA). Here, we describe the synthesis of suitable triblock degradable poly(ethylene glycol)-poly(lactide) (PEG-PLLA) cross-linker to improve the resorption capacity of such composites. A study with four different formulations was established. As reference, pure hydroxyapatite (HA) cements and composites with 40 wt% HEMA in the liquid cement phase were produced. Furthermore, HEMA was modified with 10 wt% of PEG-PLLA cross-linker or a test series containing only 25% cross-linker was chosen for composites with a fully degradable polymeric phase. Hence, we developed suitable systems with increased elasticity and 5-6 times higher toughn ess values in comparison to pure inorganic cement matrix. Furthermore, conversion rate from alpha-tricalcium phosphate (alpha-TCP) to HA was still about 90% for all composite formulations, whereas crystal size decreased. Based on this material development and advancement for a dual setting system, we managed to overcome the drawback of brittleness for pure calcium phosphate cements.
In 3D bioprinting for cartilage regeneration, bioinks that support chondrogenic development are of key importance. Growth factors covalently bound in non-printable hydrogels have been shown to effectively promote chondrogenesis. However, studies that investigate the functionality of tethered growth factors within 3D printable bioinks are still lacking. Therefore, in this study, we established a dual-stage crosslinked hyaluronic acid-based bioink that enabled covalent tethering of transforming growth factor-beta 1 (TGF-β1). Bone marrow-derived mesenchymal stromal cells (MSCs) were cultured over three weeks in vitro, and chondrogenic differentiation of MSCs within bioink constructs with tethered TGF-β1 was markedly enhanced, as compared to constructs with non-covalently incorporated TGF-β1. This was substantiated with regard to early TGF-β1 signaling, chondrogenic gene expression, qualitative and quantitative ECM deposition and distribution, and resulting construct stiffness. Furthermore, it was successfully demonstrated, in a comparative analysis of cast and printed bioinks, that covalently tethered TGF-β1 maintained its functionality after 3D printing. Taken together, the presented ink composition enabled the generation of high-quality cartilaginous tissues without the need for continuous exogenous growth factor supply and, thus, bears great potential for future investigation towards cartilage regeneration. Furthermore, growth factor tethering within bioinks, potentially leading to superior tissue development, may also be explored for other biofabrication applications.
This thesis aimed the development of a correlated device which combines FluidFM® with Fluorescence Microscopy (FL) (FL-FluidFM®) and enables the simultaneous quantification of adhesion forces and fluorescent visualization of mature cells. The implementation of a PIFOC was crucial to achieve a high-resolution as well as a stable but dynamic focus level. The functionality of SCFS after hardware modification was verified by comparing two force-curves, both showing the typical force progression and measured with the optimized and conventional hardware, respectively. Then, the integration of FL was examined by detaching fluorescently labeled REF52 cells. The fluorescence illumination of the cytoskeleton showed the expected characteristic force profile and no evidence of interference effects. Afterwards a corresponding correlative data analysis was addressed including manual force step fitting, the identification of visualized cellular unbinding, and a time-dependent correlation. This procedure revealed a link between the area of cytoskeletal unbinding and force-jumps. This was followed by a comparison of the detachment characteristics of intercellular connected HUVECs and individual REF52 cells. HUVECs showed maximum detachment forces in the same order of magnitude as the ones of single REF52 cells. This contrasted with the expected strong cohesiveness of endothelial cells and indicated a lack of cell-cell contact formation. The latter was confirmed by a comparison of HUVECs, primary HBMVECs, and immortalized EA.hy926 cells fluorescently labeled for two marker proteins of intercellular junctions. This unveiled that both the previous cultivation duration and the cell type have a major impact on the development of intercellular junctions. In summary, the correlative FL FluidFM® represents a powerful novel approach, which enables a truly contemporaneous performance and, thus, has the potential to reveal new insights into the mechanobiological properties of cell adhesion.
As a major component of the articular cartilage extracellular matrix, hyaluronic acid is a widely used biomaterial in regenerative medicine and tissue engineering. According to its well-known interaction with multiple chondrocyte surface receptors which positively affects many cellular pathways, some approaches by combining mesenchymal stem cells and hyaluronic acid-based hydrogels are already driven in the field of cartilage regeneration and fat tissue. Nevertheless, a still remaining major problem is the development of the ideal matrix for this purpose. To generate a hydrogel for the use as a matrix, hyaluronic acid must be chemically modified, either derivatized or crosslinked and the resulting hydrogel is mostly shaped by the mold it is casted in whereas the stem cells are embedded during or after the gelation procedure which does not allow for the generation of zonal hierarchies, cell density or material gradients. This thesis focuses on the synthesis of different hyaluronic acid derivatives and poly(ethylene glycol) crosslinkers and the development of different hydrogel and bioink compositions that allow for adjustment of the printability, integration of growth factors, but also for the material and biological hydrogel, respectively bioink properties.
In the field of biofabrication, biopolymer-based hydrogels are often used as bulk materials with defined structures or as bioinks. Despite their excellent biocompatibility, biopolymers need chemical modification to fulfill mechanical stability.
In this thesis, the primary alcohol of hyaluronic acid was oxidized using TEMPO/TCC oxidation to generate aldehyde groups without ring-opening mechanism of glycol cleavage using sodium periodate. For crosslinking reaction of the aldehyde groups, adipic acid dihydrazide was used as bivalent crosslinker for Schiff Base chemistry. This hydrogel system with fast and reversible crosslinking mechanism was used successfully as bulk hydrogel for chondrogenic differentiation with human mesenchymal stem cells (hMSC).
Gelatin was modified with pentenoic acid for crosslinking reaction via light controllable thiol-ene reaction, using thiolated 4-arm sPEG as multivalent crosslinker. Due to preservation of the thermo responsive property of gelatin by avoiding chain degradation during modification reaction, this gelatin-based hydrogel system was successfully processed via 3D printing with low polymer concentration. Good cell viability was achieved using hMSC in various concentrations after 3D bioprinting and chondrogenic differentiation showed promising results.