Refine
Has Fulltext
- yes (5)
Is part of the Bibliography
- yes (5)
Document Type
- Doctoral Thesis (5)
Keywords
- Aescin (1)
- Alzheimerkrankheit (1)
- Amino acids (1)
- Aminosäuren (1)
- Arzneimittel (1)
- Charged Aerosol Detektion (1)
- Chewing Gum (1)
- Diagnostik (1)
- EDC-NHS chemistry (1)
- Elektronensprayionisations-Massenspektrometrie (1)
Institute
- Institut für Pharmazie und Lebensmittelchemie (5) (remove)
Die vorliegende Arbeit hat sich zum Ziel gesetzt das medizinische Werk zweier ausgewählter historischer Autoren, nämlich jenes Hildegards von Bingen (1098 – 1179) und von Leonhart Fuchs (1501 – 1566), möglichst umfassend hinsichtlich der für Mittel pflanzlichen Ursprungs vergebenen Indikationen zu bearbeiten und mit modernem Wissen zu vergleichen. Mit Hilfe einer statistischen Auswertung sollte dabei festgestellt werden, ob die überlieferten Indikationen lediglich einer zufälligen Zuordnung folgen oder ob diese zielgerichtet Erfahrungswerte spiegeln. Sollte sich die Zuweisung einzelner Pflanzen zu bestimmten Indikationen nicht als zufällig erweisen, so wäre dies ein Beleg dafür, dass man bereits vor Jahrhunderten über ein Wissen verfügte, welches unseren heutigen Erkenntnissen vergleichbar wäre. Die Wahrscheinlichkeit, dass entsprechende Pflanzen, die heute medizinisch nicht mehr gebräuchlich sind, von historischen Autoren jedoch empfohlen werden, die gewünschten Wirkungen zeigen, wäre demzufolge groß. Derartigen Erfolg versprechenden Pflanzen oder traditionellen Anwendungen könnte sich die weitere klinische Forschung zuwenden. Bisherige Vergleiche der historischen Verwendung von Heilpflanzen griffen in der Regel aus einer Vielzahl von Indikationen und Autoren, die zur heutigen Indikation einer bestimmten Pflanze passenden Indikationen heraus. Der Ansatz der vorliegenden Arbeit ist insofern neu, als ein möglichst umfassender Vergleich eines einzelnen historischen Autors mit den aus heutiger Sicht als belegt geltenden Indikationen angestrebt wird. Um zu zeigen, ob die von einem untersuchten Autoren vergebenen Indikationen systematisch oder rein zufällig vergeben wurden, werden die per Zufall zu erwartenden „Treffer“ mit den beobachteten „Treffern“ verglichen. Die Indikationen des historischen Autors zu jeder Pflanze wurden anhand der folgenden Schritte bearbeitet: a) Identifikation der Pflanzen und Indikationen b) Zählen der Indikationen pro Pflanze c) Vergleich mit den aus heutiger Sicht als belegt geltenden Indikationen d) Zählen der Übereinstimmungen in vier abgestuften Bewertungskategorien (beobachtete „Treffer“) e) Statistischer Vergleich Im Ergebnis wird gefolgert, dass beide historischen Autoren dem Zufall signifikant in der Zuordnung von Indikationen überlegen sind. Tendenziell entspricht die Zuordnung durch Leonhart Fuchs eher den heute als anerkannt geltenden Indikationen, wobei dies nicht zwangsläufig mit einem geringeren Wissen Hildegards gleichzusetzen ist.
To diagnose diseases correctly requires not only trained and skilled personnel, but also cost-intensive and complex equipment. Rapid tests can help with the initial evaluation, but result generation can also take up to several hours, depending on the test system. At this point, novel bioresponsive diagnostic systems are used, responding to the disease related shift of biological processes. They monitor changes in the biological environment and can react to them e.g. with the release of substances. This can be used in drug delivery formulations but can also help to diagnose diseases occurring in the oral cavity and inform patients of their state of health. The tongue is herein used as a 24/7 available detector.
In section I of this work, the foundation for the development of these diagnostic systems was laid. A suitable flavoring agent was found, which is stable, can be coupled to the N-terminus of peptides and has a strongly conceivable taste. For the optimization of the protease-sensitive linker (PSL), an analytical system was established (PICS assay), which determines protease-specific cleavable amino acid sequences. In order to replace the PMMA particles previously required, an acetyl protecting group was introduced N-terminally as it protects peptides and proteins in the human body from degradation by human aminopeptidase. The new synthesized flavor was examined with a NIH cell line for cytotoxicity and with an electronic tongue setup for its bitterness.
Section II deals with the structure of a system which detects severe inflammations in the oral cavity, e.g. PA. The established PICS assay was used to confirm the previously used PSL sequence in its application. Using solid phase peptide synthesis, 3 linkers were synthesized which respond to the elevated MMP concentrations present in inflammation. The resulting peptides were acetylated and coupled with HATU/DIPEA to the modified denatonium. Cutting experiments with MMPs over different concentration and time ranges confirmed the response of the diagnostic sensor to these enzymes. The obtained construct was examined for cell toxicity by WST assay. The masked bitterness of the sensors was confirmed by an electronic tongue setup.
To address non-human proteases (and thereby infections), section III focuses on the establishment of detection system of a cysteine protease SpeB expressed by Streptococcus pyogenes. The in-house expression of SpeB using E. coli cells was established for this purpose. An analysis of the SpeB cleavage sites was performed using a PICS assay setup. Four constructs with different PSL were synthesized analogous to section II. Cleavage experiments with the expressed and purified SpeB showed a response of two constructs to the protease. In addition, a system was established to quantify the concentration of SpeB in human saliva using western blot technique with subsequent quantification.
In section IV a compound was synthesized which can now be coupled to a flavor. The final coupled construct is able to detect present NA activity specifically from influenza A and B. The market for existing influenza diagnostics was explored to determine the need for such a system. A neuraminic acid was modified in positions 4 and 7 and protected in such a way that subsequent coupling via the hydroxy-group in position 2 was selectively possible.
In summary, this results in a diagnostic platform that can be used anywhere, by anyone and at any time. This represents a new dimension in the rapid diagnosis of inflammations and bacterial or viral infections.
Alzheimer´s disease (AD) is a neurodegenerative disease and the most common form of dementia with still no preventive or curative treatment. Besides several risk factors, age is one of the major risks for AD and with an aging society, there is an urgent need for disease modifying agents. The strategy to address only one target within the intertwined network of AD failed so far.
Natural products especially the phytochemical flavonoids, which are poly-phenolic natural products, have shown great potential as disease modifying agents against neurodegenerative disorders like Alzheimer´s disease (AD) with activities even in vivo. Flavonoids are produced by many plants and the native Californian plant Eriodictyon californicum is particularly rich in flavonoids. One of the major flavonoids of E. californicum is sterubin, a very potent agent against oxidative stress and inflammation, two hallmarks and drivers of AD and neurodegeneration. Herein, racemic sterubin was synthesized and separated into its pure (R)- and (S)-enantiomer by chiral HPLC. The pure enantiomers showed comparable neuroprotection in vitro with no significant differences. The stereoisomers were configurationally stable in methanol, but fast racemization was observed in culture medium. Moreover, the activity of sterubin was investigated in vivo, in an AD mouse model. Sterubin showed a significant positive impact on short- and long-term memory at low dosages.
A promising concept for the increase of activity of single flavonoids is hybridization with aromatic acids like cinnamic or ferulic acids. Hybridization of the natural products taxifolin and silibinin with cinnamic acid led to an overadditive effect of these compounds in phenotypic screening assays related to neurodegeneration and AD. Because there are more potent agents as taxifolin or silibinin, the hybrids were further developed, and different flavonoid cinnamic acid hybrids were synthesized. The connection between flavonoids and cinnamic acid was achieved by an amide instead of a labile ester to improve the stability towards hydrolysis to gain better “druggability” of the compounds. To investigate the oxidation state of the C-ring of the flavonoid part, the dehydro analogues of the respective hybrids were also synthesized. The compounds show neuroprotection against oxytosis, ferroptosis and ATP-depletion in the murine hippocampal cell line HT22. While no overall trend within the flavanones compared to the flavones could be assigned, the taxifolin and the quercetin derivative were the most active compounds in course of all assays. The quercetin derivate even shows greater activity than the taxifolin derivate in every assay. As desired no hydrolysis product was found in cellular uptake experiments after 4h, whereas different metabolites were found. The last part of this work focused on synthetic bioisoteres of the natural product curcumin. Due to the drawbacks of curcumin and flavonoids arising from poor pharmacokinetics, rapid metabolism and sometimes instability in aqueous medium, we have examined the biological activity of azobenzene compounds designed as bioisoteres of curcumin, carrying the pharmacophoric catechol group of flavonoids. These bioisosteres exceeded their parent compounds in counteracting intracellular oxidative stress, neuroinflammation and amyloid-beta aggregation. By incorporating an azobenzene moiety and the isosteric behaviour to the natural parent compounds, these compounds may act as molecular tools for further investigation towards the molecular mode of action of natural products.
The work presented in this thesis was mainly targeted at exploring the capabilities of evaporation based LC detectors as well as further alternatives for the control of impurities in substances not exhibiting a suitable chromophore for UV-detection. In the course of the work carried out, several new methods for the identification, impurities control and composition testing of APIs were elaborated. An evaporation based detector that entered into the field of pharmaceutical analysis in the recent years was the Evaporative Light Scattering Detector (ELSD). However, non-reproducible spikes were reported when injecting concentrated test solutions as they are usually required for the control of impurities. The reasons, for the appearance of these spikes as well as possibilities for their avoidance were explored in a systematic study. Moreover, the dependence of the detector sensitivity on different eluent composition, eluent flow-rate and ELSD settings was investigated. In the course of the revision of the Ph.Eur. monographs for aspartic acid and alanine, a C18 reversed phase ion-pair LC method using 1 mmol/L of perfluoroheptanoic acid as an ion-pair reagent and a charged aerosol detector (CAD) was developed and fully validated for the purity control of Asp. The method was capable of separating the organic acids and major amino acids known to occur as process related impurities. With a slight modification, the method was also applicable for the purity control of Ala. Based on the developed LC-CAD method for the impurity control of alanine, a comparative study of the performance characteristics of different evaporation based LC detectors, i.e. ELSD, CAD and the recently developed Nano Quantity Analyte Detector (NQAD) was carried out. Additionally, an MS detector and qNMR were included in this study. It was found that the control of impurities in Alanine at an ICH conform level could be ensured using LC coupled to CAD, MSD and NQAD detection as well as by the use of qNMR. In terms of performance, prize and ease of use CAD and NQAD were found to be the most suitable alternatives. In terms of repeatability and sensitivity, the CAD appeared slightly superior to the NQAD. The quality of streptomycin sulfate is not sufficiently controlled by the current Ph.Eur. monograph in that an appropriate test for the control of the related substances is missing. A study was carried out to develop a C18 reversed phase ion-pair LC method using pentafluoropropionic acid as an ion-pair reagent and a CAD for the identification and control of the related substances. The developed method allowed the separation of 21 impurities from streptomycin. Moreover, coupling of the method to MS allowed the identification of the separated impurities. The method was shown to be sufficiently sensitive to control the related substances with a disregard limit of 0.1% as it is normally applied in the Ph.Eur. for products derived from fermentation. Currently, the aescin content of horse-chestnut standardized dry extract is determined using a complex and laborious photometric determination. A more selective LC-UV assay determination for beta-aescin has been proposed for the Ph.Eur. draft monograph of horse-chestnut standardized dry extract. Possibilities were explored to further improve the LC-method using detection by CAD. It was demonstrated that by the use of a modified LC-CAD method several problems related to the differences in the UV-response of the various components contained in the active aescin fraction could be eliminated. Moreover the proposed reference standard strategy was reviewed. Eventually, it was demonstrated on the example of two different clusters of pharmacologically active peptides how low energy collision induced dissociation mass spectrometry (low energy CID-MS) can successfully be used for identification testing in pharmacopoeial monographs. In this respect, the combination of a direct confirmation of the molecular mass via the m/z-ratio of the molecule ions with structural sequence information obtained by low energy CID-MS experiments was found to deliver a higher degree of certainty of the identity of a given substance than the set of tests currently described in the monographs. A significant gain in efficiency and throughput and important reduction of the amount of sample consumed during testing were identified as being additional advantages of this approach. Taken together, it could be demonstrated on various examples how recent technological advancements in the field of analytical chemistry can contribute to improve the quality control of APIs.
During the last decades the number of biologics increased dramatically and several biopharmaceutical drugs such as peptides, therapeutic proteins, hormones, enzymes, vaccines, monoclonal antibodies and antibody-drug conjugates conquered the market. Moreover, administration and local delivery of growth factors has gained substantial importance in the field of tissue engineering. Despite progress that has been made over the last decades formulation and delivery of therapeutic proteins is still a challenge. Thus, we worked on formulation and delivery strategies of therapeutic proteins to improve their biological performance.
Phase I of this work deals with protein stability with the main focus on a liquid protein formulation of the dimeric fusion protein PR-15, a lesion specific platelet adhesion inhibitor. In order to develop an adequate formulation ensuring the stability and bioactivity of PR-15 during storage at 4 °C, a pH screening, a forced degradation and a Design of Experiments (DoE) was performed. First the stability and bioactivity of PR-15 in 50 mM histidine buffer in relation to pH was evaluated in a short-term storage stability study at 25 °C and 40 °C for 4 and 8 weeks using different analytical methods. Additionally, potential degradation pathways of PR-15 were investigated under stressed conditions such as heat treatment, acidic or basic pH, freeze-thaw cycles, light exposure, induced oxidation and induced deamidation during the forced degradation study. Moreover, we were able to identify the main degradation product of PR-15 by performing LC/ESI-MS analysis. Further optimization of the injectable PR 15 formulation concerning pH, the choice of buffer and the addition of excipients was studied in the following DoE and finally an optimal PR-15 formulation was found.
The growth factors BMP-2, IGF-I and TGF-β3 were selected for the differentiation of stem cells for tissue engineering of cartilage and bone in order to prepare multifunctionalized osteochondral implants for the regeneration of cartilage defects.
Silk fibroin (SF) was chosen as biomaterial because of its biocompatibility, mechanical properties and its opportunity for biofunctionalization. Ideal geometry of SF scaffolds with optimal porosity was found in order to generate both tissues on one scaffold.
The growth factors BMP-2 and IGF-I were modified to allow spatially restricted covalent immobilization on the generated porous SF scaffolds. In order to perform site-directed covalent coupling by the usage of click chemistry on two opposite sides of the scaffold, we genetically engineered BMP-2 (not shown in this work; performed by Barbara Tabisz) and IGF-I for the introduction of alkyne or azide bearing artificial amino acids. TGF β3 was immobilized to beads through common EDC/NHS chemistry requiring no modification and distributed in the pores of the entire scaffold.
For this reason protein modification, protein engineering, protein immobilization and bioconjugation are investigated in phase II. Beside the synthesis the focus was on the characterization of such modified proteins and its conjugates. The field of protein engineering offers a wide range of possibilities to modify existing proteins or to design new proteins with prolonged serum half-life, increased conformational stability or improved release rates according to their clinical use.
Site-directed click chemistry and non-site-directed EDC/NHS chemistry were used for bioconjugation and protein immobilization with the aim to underline the preferences of site-directed coupling.
We chose three strategies for the incorporation of alkyne or azide functionality for the performance of click reaction into the protein of interest: diazonium coupling reaction, PEGylation and genetic engineering. Azido groups were successfully introduced into SF by implementation of diazonium coupling and alkyne, amino or acid functionality was incorporated into FGF-2 as model protein by means of thiol PEGylation. The proper folding of FGF-2 after PEGylation was assessed by fluorescence spectroscopy, WST-1 proliferation assay ensured moderate bioactivity and the purity of PEGylated FGF-2 samples was monitored with RP-HPLC. Moreover, the modification of native FGF-2 with 10 kDa PEG chains resulted in enhanced thermal stability.
Additionally, we genetically engineered one IGF-I mutant by incorporating the unnatural amino acid propargyl-L-lysine (plk) at position 65 into the IGF-I amino acid sequence and were able to express hardly verifiable amounts of plk-IGF-I. Consequently, plk-IGF-I expression has to be further optimized in future studies in order to generate plk-IGF-I with higher yields.
Bioconjugation of PEGylated FGF-2 with functionalized silk was performed in solution and was successful for click as well as EDC/NHS chemistry. However, substantial amounts of unreacted PEG-FGF-2 were adsorbed to SF and could not be removed from the reaction mixture making it impossible to expose the advantages of click chemistry in relation to EDC/NHS chemistry. The immobilization of PEG-FGF-2 to microspheres was a trial to increase product yield and to remove unreacted PEG-FGF-2 from reaction mixture. Bound PEG-FGF-2 was visualized by fluorescence imaging or flow cytometry and bioactivity was assessed by analysis of the proliferation of NIH 3T3 cells. However, immobilization on beads raised the same issue as in solution: adsorption caused by electrostatic interactions of positively charged FGF-2 and negatively charged SF or beads. Finally, we were not able to prove superiority of site-directed click chemistry over non-site-directed EDC/NHS.
The skills and knowledge in protein immobilization as well as protein characterization acquired during phase II helped us in phase III to engineer cartilage tissue in biofunctionalized SF scaffolds.
The approach of covalent immobilization of the required growth factors is relevant because of their short in vivo half-lives and aimed at controlling their bioavailability. So TGF-β3 was covalently coupled by means of EDC/NHS chemistry to biocompatible and biostable PMMA beads. Herein, we directly compared bioactivity of covalently coupled and adsorbed TGF-β3. During the so-called luciferase assay bioactivity of covalent coupled as well as adsorbed TGF-β3 on PMMA beads was ensured. In order to investigate the real influence of EDC/NHS chemistry on TGF-β3’s bioactivity, the amount of immobilized TGF-β3 on PMMA beads was determined. Therefore, an ELISA method was established. The assessment of total amount of TGF-β3 immobilized on the PMMA beads allowed as to calculate coupling efficiency. A significantly higher coupling efficiency was determined for the coupling of TGF-β3 via EDC/NHS chemistry compared to the reaction without coupling reagents indicating a small amount of adsorbed TGF-β3. These results provide opportunity to determine the consequence of coupling by means of EDC/NHS chemistry for TGF β3 bioactivity. At first sight, no statistically significant difference between covalent immobilized and adsorbed TGF-β3 was observed regarding relative luciferase activities. But during comparison of total and active amount of TGF-β3 on PMMA beads detected by ELISA or luciferase assay, respectively, a decrease of TGF-β3’s bioactivity became apparent. Nevertheless, immobilized TGF β3 was further investigated in combination with SF scaffolds in order to drive BMSCs to the chondrogenic lineage. According to the results obtained through histological and immunohistochemical studies, biochemical assays as well as qRT-PCR of gene expression from BMSCs after 21 days in culture immobilized TGF-β3 was able to engineer cartilage tissue. These findings support the thesis that local presentation of TGF β3 is superior towards exogenous TGF β3 for the development of hyaline cartilage. Furthermore, we conclude that covalent immobilized TGF β3 is not only superior towards exogenously supplemented TGF-β3 but also superior towards adsorbed TGF-β3 for articular hyaline cartilage tissue engineering. Diffusion processes were inhibited through covalent immobilization of TGF-β3 to PMMA beads and thereby a stable and consistent TGF-β3 concentration was maintained in the target area.
With the knowledge acquired during phase II and III as well as during the studies of Barbara Tabisz concerning the expression and purification of plk-BMP-2 we made considerable progress towards the formation of multifunctionalized osteochondral implants for the regeneration of cartilage defects. However, further studies are required for the translation of these insights into the development of multifunctionalized osteochondral SF scaffolds.